MODEL: F2TS

F2TS SPECIFICATIONS

ES-5412 Rev.6 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners F2 Series

THERMOCOUPLE TRANSMITTER

Functions & Features

• Accepting direct input from a thermocouple and providing

a standard process signal

• 5-segment linearization

• Burnout protection

• High-accuracy cold junction compensation

• Fast response type available

• High-density mounting

Typical Applications

• High-accuracy cold junction compensation benefits narrow

span measurements

• 0.1 μA burnout sensing enables long distance

transmission with minimum offset drifts

• Electric furnace (isolation)

• No burnout type can connect to a single T/C in parallel

with a recorder

22.5 (.89)

75

(2.95)

mm (inch)

107

(4.21)

MODEL: F2TS-[1][2]-R[3]

ORDERING INFORMATION

• Code number: F2TS-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. F2TS-2A-R/BL)

• Temperature range (e.g. 0 – 800°C)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT THERMOCOUPLE

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

N: N (Usable range -270 to +1300°C, -454 to +2372°F)

0: Specify

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Burnout

blank: Upscale burnout

/BL: Downscale burnout

/BN: No burnout

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating