MODEL: IT40SW6F

IT40SW6F SPECIFICATIONS

ES-2434 Rev.0 Page 2/10

http://www.m-system.co.jp/

DESIGN TYPE

2: Type 2

(refer to outline dimensions)

COUNTRY IN WHICH IT IS INTENDED FOR USE

U: The United States

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[7] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

For related products of wireless device, refer to M-System's

web site.

• LAN cable (model: ITCA)

• Mounting Pole (model: ITPL)

• Mounting Adapter (model: ITAD1)

• PC configurator software (model: ITCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

Maintenance software

Maintenance console: MH920 Console International (model:

MH920CI) (OKI)

(Maintenance software is downloadable at M-System’s web

site.)

GENERAL SPECIFICATIONS

Degree of protection: IP 65, vertical mounting only (bottom

connectors excluded)

Connection

• Power: UL1007 AWG20

• Input: UL1007 AWG22

• Wired communication: Separable tension clamp terminal

Recommended solderless terminal

• Wireless communication: SMA coaxial connector

• Maintenance: Mini USB type B female connector

Housing material: Flame-resistant resin

Lens: Flame-resistant resin (transparent)

Isolation

Power input to discrete input to communication to FE1 to

antenna connector

DIP SW Setting: Frequency of lamp blinking and buzzing

discontinuance, buzzing volume level, output at connection

failed and so on (refer to the instruction manual)

Lamp: Red, amber, green, blue and white LEDs

on/blinking (approx. 2 Hz, 10 Hz)

Indicator LEDs: Power, Run

(Refer to the insruction manual)

Buzzing: Approx. 3.3 kHz

Interval: continuous/intermittent (approx. 2 Hz, 10 Hz)

MODBUS COMMUNICATION

Protocol: Modbus-RTU

Configuration: Bus type multi-drop

Standard: Conforms to TIA/EIA-485-A

Communication: Half-duplex, asynchronous, no procedure

Transmission distance: 500 meters max.

Transmission media: Shielded twisted-pair cable (CPEV-S

0.9 dia.)

Indicator LEDs: SD, RD

Max. no. of connections at once: 31

Transmission setting: PC configurator software

Data: RTU (Binary)

Baud rate: 4800, 9600, 19.2k, 38.4 k (bps)

Parity: None, even or odd

Stop bit: 1 or 2

WIRELESS SPECIFICATIONS

Communication Standard: IEEE 802.15.4g

Frequency: 900MHz band (902 - 928 MHz)

Max. Transmission power: 20 mW

Bandwidth: 400 kHz

Modulation: GFSK

Baud rate: Max. 100 kbps

Channels: 1 to 43 ch

Security: 128bit AES

Indicator LEDs: 920Run, 920Link, and 920ERR

Protocol: Modbus-RTU

Communication module: Router module incorporated

(Oki Electric Industry Co., Ltd. )

Radio parameters setting: With configurator software