MODEL: IT40SW1

IT40SW1 SPECIFICATIONS

ES-2372 Rev.9 Page 2/6

http://www.m-system.co.jp/

DESIGN TYPE

2: Type 2

(refer to outline dimensions)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

COUNTRY

blank: Japan, EU

[7] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• LAN cable (model: ITCA)

• Mounting Pole (model: ITPL)

• Mounting Adapter (model: ITAD1)

• PC configurator software (model: ITCFG)

Functions are configurable using the PC Configurator

Software.

Downloadable at M-System’s web site.

GENERAL SPECIFICATIONS

Degree of protection: IP 65, vertical mounting only (bottom

connectors excluded)

Connection

Power: UL1007 AWG20

Input: UL1007 AWG22

Ethernet: RJ-45 Modular Jack

Housing material: Flame-resistant resin

Lens: Flame-resistant resin (transparent)

Isolation: Discrete input or power input to network

DIP SW Setting: Frequency of lamp blinking and buzzing

discontinuance, buzzing volume level, output at connection

failed and IP address (refer to the instruction manual)

Lamp: Red, amber, green, blue and white LEDs

on/blinking (approx. 2 Hz, 10 Hz)

Indicator LEDs: Power, Run

(Refer to the insruction manual)

Buzzing: Approx. 3.3 kHz

Interval: continuous/intermittent (approx. 2 Hz, 10 Hz)

COMMUNICATION

■ Common spec.

Modbus protocol

Protocol: Modbus/TCP

Data: RTU (Binary)

Port No.: 502

Max. number of socket connections: 10

IP address: 192.168.0.1 (factory setting);

Selectable with PC Configurator Software

(model: ITCFG)

■ Ethernet

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Transmission media: 10BASE-T (STP, Category 5) 100BASE-

TX (STP, Category 5e)

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.1 (factory setting);

Selectable with PC Configurator Software

Ethernet indicator LED: Link, Link100, COL

■ Wireless LAN

Communication Standard: IEEE 802.11b/g/n

Frequency range: 2400 - 2483.5 MHz (ch1 - ch13)

Max. transmision distance (optical): Approx. 50 m (depends

on setting)

Access mode: infrastructure/ad hoc

Security: WEP 64bit/128bit, WPA (TKIP, AES), WPA2 (TKIP,

AES)

Wireless LAN indicator: WLAN1

INPUT SPECIFICATIONS

■ Discrete Input: Dry contact, open collector NPN

Input resistance: Approx. 4.4 kΩ

Common: Negative common NPN

ON level: ≤ 5 V / ≥ 3.5 mA (Input - COM)

OFF level: ≥ 18 V DC / ≤ 1 mA (Input - COM)

Input current: ≤ 5.5 mA per point @ 24 V DC

INSTALLATION

Power consumption

•DC: Approx. 5.5 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 85 %RH (non-condensing)

Atmosphere: No corrosive gas

Mounting: Direct mounting

Mounting direction: Vertical

Weight: Approx. 650 g (1.43 lb)