MODEL: LPCE

http://www.m-system.co.jp/

LPCE SPECIFICATIONS

ES-1952 Rev.2 Page 1/3

Power Transducer Series L-UNIT

PT/CT TRANSDUCER

(RMS sensing)

Functions & Features

• VT and CT transducers combined in one housing

• Minimum ripple

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

• Centralized monitoring and control of power line and

power supply voltages measured at switch boards

• Centralized monitoring and control of current in motors

• Monitoring abnormal voltage drops at switch boards and

abnormal current in motors for detecting overload

75

(2.95)

112

(4.41)

75

(2.95)

mm (inch)

MODEL: LPCE-[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: LPCE–[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. LPCE-55A-C/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] VT INPUT

Voltage

5: 0 – 150 V AC

6: 0 - 300 V AC

[2] CT INPUT

Current

1: 0 – 1 A AC

5: 0 – 5 A AC

[3] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 500 Ω max.)

D: 0 – 20 mA DC(Load resistance 500 Ω max.)

E: 0 – 16 mA DC (Load resistance 625 Ω max.)

F: 0 – 10 mA DC (Load resistance 1000 Ω max.)

G: 0 – 1 mA DC (Load resistance 10 kΩ max.)

J: 0 – 5 mA DC (Load resistance 2000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[4] AUXILIARY POWER SUPPLY

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

R: 24 V DC

V: 48 V DC

[5] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to auxiliary power, between