MODEL: M1EXR-2

M1EXR-2 SPECIFICATIONS

ES-5984 Rev.2 Page 1/8

https://www.m-system.co.jp/

2 Channel Super-mini Signal Conditioners

with Display M1E-2 Series

RTD TRANSMITTER

(2 channels, PC programmable)

Functions & Features

• Accepts direct input from a RTD and provides a linearized

process signal

• Wide selection of RTD

• 2 channels

• Adjustments with the front buttons

• Leadwire resistance compensation

• OEL display with good visibility

Typical Applications

• Long distance transmission between the RTD and the

transmitter

36 (1.42)

99

(3.90)

125 (4.92)

mm (inch)

Note: The gure shows the combination

of the unit and the base.

MODEL: M1EXR-2–[1][2]

ORDERING INFORMATION

• Code number: M1EXR-2-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. M1EXR-2-M2/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

NO. OF CHANNELS

2: 2 channels

INPUT – Field-selectable

RTD

JPt 100 (JIS'89), Pt 100 (JIS'89), Pt 100 (JIS'97, IEC),

Pt 50Ω (JIS'81), Ni 508.4Ω, Pt 1000, Ni 100, Cu 10 @ 25℃

OUTPUT – Field-selectable

◆ DC Output

• Current output: 0 - 20 mA DC

• Voltage output: -5 - +5 V DC

• Voltage output: -10 - +10 V DC

[1] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5984)

RELATED PRODUCTS

• Installation base (model: M1E-BS2)

• M1E configurator software (model: M1ECFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual (EM-5981) for the M1E configurator for

applicable cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

• Connected to base with connector

• Base

M2.6 screw terminals (torque: 0.5 N·m)

Applicable solderless terminal size (M3)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Ch1.input to ch2.input to Ch1.output to ch2.output

to power

Overrange output: Approx. -10 to +110 % (Not available for