MODEL: M7EASV

M7EASV SPECIFICATIONS

ES-7762 Rev.13 Page 1/6

https://www.m-system.co.jp/

Super-mini Signal Conditioners with

LCD Display M7E-UNIT Series

DC ALARM

(dual or quad alarm trip)

Functions & Features

• Provides relay outputs at preset DC input levels

• Quad or dual trip

• Front LCD display indicating values in scaled engineering

unit range is used to program the module

• Adjustable deadband (hysteresis)

• Software lock

• ON delay time selectable

• Hi/Lo trip and energized/de-energized coil independently

selectable for each setpoint

• Enclosed relays

• Relays can be powered by 200 V AC and 100 V DC

• High-density mounting on DIN rail

Typical Applications

• Annunciator

• Various alarm applications

Mode

Set

Up

Down

83

[3.27]

124

[4.88]

29.5

[1.16]

mm [inch]

MODEL: M7EASV-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M7EASV-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. M7EASV-Z12-M2/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

[1] INPUT

Current

Z1: Range 0 – 50 mA DC (Input resistance 100 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

[2] OUTPUT

2: 4 points; N.O. or make contact

3: 4 points; N.C. or break contact

5: 2 points; SPDT or transfer contact

[3] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7762)

Default setting will be used if not otherwise specified.