MODEL: MDCAT

MDCAT SPECIFICATIONS

ES-8139 Rev.7 Page 1/5

https://www.m-system.co.jp/

Lightning Surge Protectors for

Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR ETHERNET

(PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T)

Functions & Features

• Designed specifically for Ethernet network

• Conforms with 1000 Base-T, PoE and PoE Plus

• LAN cable’s shield wire can be floating or grounding by a

shortcircuit bar

• DIN rail mounting

38 [1.5]

93.5

[3.68]

mm [inch]

35

[1.38]

MODEL: MDCAT-[1][2]

ORDERING INFORMATION

• Code number: MDCAT-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. MDCAT-5E/DR/Q)

[1] CABLE CATEGORY

5E: CAT5e

6: CAT6

[2] OPTIONS (multiple selections)

Single mount DIN rail

blank: Without

/DR: With single mount DIN rail

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

CAUTION

• When this unit is earthed via a DIN rail, use a steel or

copper rail. Oxide film on the surface of an aluminium rail

may lower the electric conductivity between this module

and the ground.

• Single mount DIN rail for option code ‘/DR’ is made of

aluminum. Connect to ground with ground terminal when

this DIN rail is used.

PACKAGE INCLUDES...

LAN cable connected to the protected device (STP, 1 meter)

APPLICABLE NETWORK

10 BASE-T: IEEE 802.3i

100 BASE-TX: IEEE 802.3u

1000 BASE-T: IEEE 802.3ab

PoE: IEEE 802.3af

PoE Plus: IEEE802.3at

GENERAL SPECIFICATIONS

Connection

Network: RJ-45 modular jack

Grounding: M3 screw terminal (torque 0.6 N·m)

or via DIN rail

Screw terminal: Nickel-plated brass

DIN rail material: Aluminum

Housing material: Flame-resistant resin (black)

INSTALLATION

Operating temperature: -25 to +85°C (-13 to +185°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN Rail (TH35-7.5, 1-mm-thick)

Weight: 150 g (0.33 lb)