MODEL: 47DM

47DM SPECIFICATIONS

ES-9510 Rev.11 Page 1/12

http://www.m-system.co.jp/

Digital Panel Meters 47 Series

POTENTIOMETER INPUT DIGITAL PANEL METER

(5½ digit, LCD display type)

Functions & Features

• 5½ digit potentiometer input digital panel meter

• Scaling range -20000 to 100000

• 1/8 DIN size

• Display color can be changed at alarm

• Bargraph indicator shows approximate measuring status

• 12 V or 24 V excitation supply

• External event trigger input

• RS-485 / Modbus RTU output

• Infrared interface

• BCD output

• Loop test output (DC output option)

• IP66 front panel

• Separable terminal block

• Safety terminal cover tethered to the device with a strap

Alarm/

Scale/

Max/Min

Shift

Up

48

(1.89)

mm (inch)

96 (3.78)

98.5 (3.88)

Max

Min

FZ

TZ

NG Zro Sp

n

TG

Hld

Tch

HH

H

P

L

LL

MODEL: 47DM-1[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: 47DM-1[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. 47DM-1111-M2/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

INPUT

1: Total resistance 100 Ω – 10 kΩ

[1] DC OUTPUT

0: Without

1: With

[2] EXCITATION SUPPLY

1: +12 V sensor excitation

2: +24 V two-wire transmitter excitation

[3] I/O OPTIONS

0: None

1: Alarm output: N.O. relay, 4 points

2: Alarm output: SPDT relay, 2 points

3: Alarm output: N.O. photo MOSFET relay, 4 points

4: Network interface: RS-485 / Modbus RTU

5: BCD output

6: Event trigger input

7: Alarm output: N.O. relay, 4 points

+ Network interface: RS-485 / Modbus RTU

8: Alarm output: SPDT relay, 2 points +

Network interface: RS-485 / Modbus RTU

9: Alarm output: N.O. photo MOSFET relay, 4 points + BCD output

A: Event trigger input + BCD output

[4] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[5] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9510)

RELATED PRODUCTS

• Connector terminal block (model: CNT)

• Special cable (model: HDR40)

• Infrared Communication Adaptor (model: COP-IRU)

• PC configurator software (model: 47DCFG)

Downloadable at M-System’s web site.

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Degree of protection: IP66; applicable to the front of the