MODEL: 48NDM

48NDM SPECIFICATIONS

ES-9445 Rev.13 Page 1/10

http://www.m-system.co.jp/

Bargraph Indicators 48N Series

BARGRAPH INDICATING ALARM

(with 4-digit digital meter; potentiometer input)

Functions & Features

• Displays a process variable in graphic bargraph of 101

LED segments

• Clear 4-digit digital meter

• Provides max. 4 alarm contact outputs

• Multi-color indicator

• LED brightness adjustment

• IP65 front cover

• Scale plate is easily replaced

• Separable terminal block

50

40

30

20

10

0

10

20

30

40

50

%

mA

100 SET

H

S

P

Z

L

90

80

70

60

50

40

30

20

10

0

M

144

(5.67)

36 (1.42)

103

(4.06)

mm (inch)

MODEL: 48NDM–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: 48NDM-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. 48NDM-42-R/CE/D/Q)

• Bargraph scale (e.g. 0 – 100 %) (See ‘Scale Plate.’)

• Digital indicator scale (e.g. 0.0 – 130.0)

• Specify the specification for option code /Q

(e.g. /C01/SET)

[1] ALARM OUTPUT

0: None

2: 2 points

4: 4 points

[2] BAR LED COLOR

R: Red

Y: Amber

G: Green

B: Blue

1: Multi-color (red, orange and green), Pattern 1

(See ‘External View.’)

2: Multi-color (red, orange and green), Pattern 2

(See ‘External View.’)

INPUT

Total resistance 100 Ω – 10 kΩ

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 50/60 Hz

(CE marking not available)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±15 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Bezels

blank: Bezels for M-System’s 48 Series panel cutout

/D: Bezels for DIN panel cutout

/F: Bezels for Fuji Electric's PAJ, PAK, PBA panel cutout

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9445)

BEZEL OPTION

Bezels are used to adapt the 48N Series to an existing panel

cutout. In order to replace M-System’s 48 Series products,

use the one attached to the 48N Series as standard. When

the existing panel is cut according to DIN standard, specify

‘/D’ suffix code.

For a new installation, no bezel is required. Please refer to

‘Mounting Requirement’ and mount the 48N directly.

Ingress protection is invalid when the 48N is mounted with a

bezel, or when multiple modules are stacked side by side.