MODEL: M5PA

M5PA SPECIFICATIONS

ES-2483 Rev.10 Page 2/4

http://www.m-system.co.jp/

INPUT SPECIFICATIONS

■ Open Collector

Frequency range: 0 – 0.01 Hz through 100 kHz

Pulse width time requirement: ≥ 4 µsec. for both ON and

OFF

Sensing voltage/current: 5 V DC @2 mA

Detecting levels: ≤ 0.7 V / 350 Ω for ON; ≥ 4 V / 10 kΩ for

OFF

■ Mechanical Contact

Frequency range: 0 – 0.01 Hz through 30 Hz

Pulse width time requirement: ≥ 10 msec. for both ON and

OFF

Sensing voltage/current: 5 V DC @2 mA

Detecting levels: ≤ 0.7 V / 350 Ω for ON; ≥ 4 V / 10 kΩ for

OFF

■ Voltage Pulse

Frequency range: 0 – 0.01 Hz through 100 kHz

Pulse width time requirement: ≥ 4 µsec. for both H and L

levels

Waveform: Square or sine

Input impedance: ≥ 10 kΩ

Max. voltage between input terminals: ±50 V

Detecting H level

5 V pulse: ≥ 3 V

12 V, 24 V pulse: ≥ 6 V

Detecting L level

5 V pulse: ≤ 1 V

12 V, 24 V pulse: ≤ 4 V

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage: 0 – 10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; at ≥ 1 V

INSTALLATION

Power Consumption

•AC:

Approx. 2 VA at 100 V

Approx. 3 VA at 200 V

Approx. 3 VA at 264 V

•DC: Approx. 2 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 80 g (2.8 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Max. 0.5 sec. + 1 pulse cycle (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute

AC powered: 1500 V AC @1 minute

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581