MODEL: R5-SS

R5-SS SPECIFICATIONS

ES-6143 Rev.7 Page 1/3

http://www.m-system.co.jp/

Remote I/O R5 Series

DC CURRENT INPUT MODULE

96.5

(3.80)

18 (.71)

90

(3.54)

mm (inch)

MODEL: R5-SS[1][2][3]

ORDERING INFORMATION

• Code number: R5-SS[1][2][3]

Specify a code from below for each [1] through [3].

(e.g. R5-SS2W/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] NO. OF CHANNELS

1: 1 channel

2: 2 channels

[2] COMMUNICATION MODE

S: Single

W: Dual

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Input: Euro type connector terminal

stripped length 7 mm)

Internal power: Via the base (model: R5-BS)

Isolation: Input 1 to input 2 to internal bus or internal power

Input range: Selectable with the side DIP SW

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

INPUT SPECIFICATIONS

■ NARROW SPAN: -1 – +1 mA, 0 – 1 mA DC

Input resistance: 1600 Ω resistor incorporated

■ WIDE SPAN: -40 – +40 mA, -20 – +20 mA 0 – 40 mA, 0 –

20 mA, 4 – 20 mA DC

Input resistance: 40 Ω resistor incorporated

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

PERFORMANCE

Conversion accuracy: ±0.1 %

Data range: 0 – 10000 of the input range

Data allocation: 1 (2 for 2-channel type)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.2 sec. (0 – 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input 1 to input

2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581