MODEL: R30YS4

R30YS4 SPECIFICATIONS

ES-9006 Rev.4 Page 2/5

https://www.m-system.co.jp/

PERFORMANCE

Conversion accuracy: ±0.1 %

Conversion rate: 10 msec.

Data range: 0 – 10000 of the output range

Data allocation: 4

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Output delay time: ≤ 250 msec. (0 - 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (output 1 to

output 2 to output 3 to output 4 to internal bus or internal

power)

1500 V AC @ 1 minute (power input to FE; isolated by the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■ Output at the loss of communication

• Output Hold

If the network module is in error, the module holds the

signal at error and stands by until the communication

recovers.

• Output set value

If the network module is in error, the module holds the

signal at error or power up and stands by until the

communication recovers. The the signal at error or power

up is selectable with PC configurator software (Model: R30

CFG)

Not depending on output at the loss of communication

setting, when power up the module holds the signal at error

or power up and stands by until the normal data is received.

■ OUTPUT WIRE BREAKDOWN DETECTION

In the case of wire breakdown, output error is detected.

Then, the ERR indicator LED blinks in red and the flag of

error is set on the PLC etc.

PC CONFIGURATOR

The following parameters can be set with using PC

Configurator Software (model: R30CFG)

Refer to the users manual for the R30CFG for detailed

operation of the software program.

■ CHANNEL INDIVIDUAL SETTING

PARAMETER

SETTING RANGE

DEFAULT SETTING

Unused setting

CH enabled

CH disabled

CH enabled

Fine zero adjustment

-320.00 – +320.00 (%) 0.00 (%)

Fine gain adjustment

-3.2000 – +3.2000

1.0000

Scaled range zero

-32 000 – +32 000

0

Scaled range span

-32 000 – +32 000

10 000

Output range at

communication

failure or power up

-15.00 – +115.00 (%)

-15.00 (%)

■ CHANNEL BATCH SETTING

PARAMETER

SETTING RANGE

DEFAULT SETTING

Simulate output

Normal output

Simulation data

Normal output

Output at the loss of

communication

Hold the output data

User set data output

Hold the output

data