MODEL: R30YN16A

R30YN16A SPECIFICATIONS

ES-9011 Rev.3 Page 1/5

https://www.m-system.co.jp/

Remote I/O R30 Series

DISCRETE OUTPUT MODULE

(NPN transistor output, 16 points)

Functions & Features

• 16 channels for discrete output remote I/O module

25 [.98]

mm [inch]

98

[3.86]

110

[4.33]

MODEL: R30YN16AS[1]

ORDERING INFORMATION

• Code number: R30YN16AS[1]

Specify a code from below for [1].

(e.g. R30YN16AS/Q)

• Specify the specification for option code /Q

(e.g. /C01)

TYPE

16A: Output, 16 points (NPN transistor)

COMMUNICATION MODE

S: Single

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R30BS)

Output: M3 separable screw terminal (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R30BS)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG. Co., Ltd., Nichifu Co., Ltd.

(Solderless terminals with insulation sleeve do not fit.)

Screw terminal: Nickel-plated steel

Isolation: Output to internal bus or internal power

Status indicator LED: RUN, ERR

Discrete output indicator LEDs: Green LED; turns on with

output ON

(Refer to the instruction manual.)

■Recommended solderless terminal size - M3 (unit: mm)

12 max.

3 max.

3.2 dia.

OUTPUT SPECIFICATIONS

Module type: Discrete output, 16 points

Isolation: Optical isolator

Common: Negative common (NPN) per 16 points

Rated load voltage: 24 V DC ±10 %, ripple 5 %p-p max.

Rated output current: 0.1 A per point, 1.6 A per common

Residual voltage: ≤ 1.2 V

Leakage current: ≤ 0.1 mA

ON delay: ≤ 0.5 msec.

OFF delay: ≤ 1.0 msec.

Overload current protection function: Limits the current

value when overcurrent is detected

Overheat protection function: Turns OFF the outputs when

overheat is detected

(When driving an inductive load, connect a diode in parallel

with the load.)

INSTALLATION

Current consumption: Approx. 75 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R30BS)

Weight: 150 g (0.33 lb)