Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Optical data coupler

DAD15-8P-R-2388

5

Chaining

The SYNC output can also be used to start an additional EN-

ABLE input. Up to four MASTERS can be chained together

in this manner. The devices must then be addressed by

means of the A1 and A2 address switches. The SLAVE be-

longing to the MASTER in question requires the same

address switch setting.

Arrangement and mounting

The DAD15 data light barrier consists of an electronics unit

with spring-loaded terminals and 2 M16 cable glands.

The electronics unit is connected with an internal connector.

It is also fastened to it with 4 screws.

The unit is pre-mounted on the mounting bracket OMH-DAD10.

Sync. Slave 1

(for reception only)

Sync. Master 1

in

Enable Master 2

transmission reception

transmission reception

transmission recept

transmission

reception

0.5 ms

0.3 ms

3 ms

3 ms

35 ms

h

l

h

l

h

l

Master 1

Sync. Master 1

Slave 1

Master 2

Sync. Master 2

Timing