TLSH263P

2002-09-25

2

Characteristic

Symbol

Test Condition

Min

Typ.

Max

Unit

Forward voltage

―

2.1

2.5

V

Reverse current

―

―

50

µA

Luminous intensity

(Note)

85

300

―

mcd

Peak emission wavelength

―

623

―

nm

Spectral line half width

∆λ

―

15

―

nm

Dominant wavelength

―

613

―

nm

(Note) : Lamps are classified into the following three ranks according to their luminous intensity. Measurement

tolerance for each limit is ±15%.

N: 100

-200mcd, P: 180-360mcd, Q: 320-640mcd.

Precaution

Please be careful of the followings

· Soldering temperature: 260°C max

Soldering time: 3s max

(Soldering portion of lead: Up to 2mm from the body of the device)

· If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to

the resin.Soldering should be performed after lead forming.

· This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp,please ensure

that it will not be affected by this IR light.