MODEL: PRP

PRP SPECIFICATIONS

ES-4823 Rev.14 Page 4/8

http://www.m-system.co.jp/

It is not true that input signal = output signal.

(Not input signal 4.00 mA DC = output signal 4.00 mA DC,

there is difference around 0.04 mA DC.)

REFERENCE DATA

Below data is based on the test results and serves as a

reference only. Actual values may differ depending on the

unit.

● Fixed frequency endurance test

Acceleration: 5.1 G (50 m/s2)

Frequency: at resonant frequency

Amplitude (Maximum displacement): 0.35 mm

Endurance: 30 min.

Direction: X, Y, Z

● Sweep endurance test according to IEC 61298-3

Acceleration: 6 G (58.8 m/s2)

Frequency: 10 to 1000 Hz

Amplitude (Maximum displacement): 0.15 mm

Cycle: 20 cycles

Rate: 1 Oct./min.

Endurance: approx. 4 hr. 30 min.

Direction: X, Y, Z