MODEL: R3-DC32C

R3-DC32C SPECIFICATIONS

ES-8348 Rev.5 Page 1/5

https://www.m-system.co.jp/

Remote I/O R3 Series

DISCRETE OUTPUT MODULE

(PNP transistor output, 32 points, shortcircuit protection)

27.5 [1.08]

130

[5.12]

109

[4.29]

mm [inch]

MODEL: R3–DC32C[1][2]

ORDERING INFORMATION

• Code number: R3-DC32C[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R3-DC32CW/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01)

NO. OF CHANNELS

32: 32

OUTPUT

C: PNP transistor

[1] COMMUNICATION MODE

S: Single

W: Dual

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R3-BSx)

Output: 40-pin connector (Fujitsu FCN-365P040-AU)

Internal power: Via the Installation Base (model: R3-BSx)

Isolation: Do11 thru Do18 to Do21 thru Do28 to Do31 thru

Do38 to Do41 thru Do48 to internal bus or internal power

Output hold setting: Setting for communication error with

side DIP SW

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Green LED turns on in normal operating

conditions.

Output status indicator: Red LED; turns on with the output

ON.

Group selector: Switches the output status indicator

A. 1 - 8: Do11 - Do18

9 - 16: Do21 - Do28

B. 1 - 8: Do31 - Do38

9 - 16: Do41 - Do48

OUTPUT SPECIFICATIONS

Output: Open collector, 32 points

Isolation: Optical isolator

Rated load voltage

Nominal: 19.2 to 30 V DC

Absolute: 45 V DC

Rated load current: 0.25 A per point, 1.0 A per common

Voltage drop at ON: ≤ 2.0 V

Leakage current at OFF: ≤ 0.3 mA

(24 V DC load, all points OFF)

ON delay: ≤ 1.0 msec.

OFF delay: ≤ 3.5 msec.

Shortcircuit protection: Works for 0.7 A or more;

automatically resets after recovery

(When driving an inductive load, connect a diode in parallel

with the load.)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 150 g (0.33 lb)