Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Retroreflective sensor with polarization filter

OBR15M-R200-EP-IO-V3

3

To unlock the adjustment functions turn the sensing range /sensitivity adjuster for more than 180 degrees.

Sensing Range / Sensitivity

Turn sensing range / sensitivity adjuster clockwise to increase sensing range / sensitivity.

Turn sensing range / sensitivity adjuster counter clockwise to decrease sensing range / sensitivity.

If the end of the adjustment range is reached, the signal indicator starts flashing with 8 Hz.

Light-on / Dark-on Configuration

Press the light-on / dark-on changeover switch for more than 1 second (less than 4 seconds). The light-on / dark-on mode chang-

es and the operating indicators are activated accordingly.

If you press the light-on / dark-on changeover switch for more than 4 seconds, the light-on /dark-on mode changes back to the

original setting. On release of the light-on / dark-on changeover switch the current state is activated.

Restore Factory Settings

Press the light-on / dark-on changeover switch for more than 10 seconds (less than 30 seconds) until all LEDs turn off. On release

of the light-on / dark-on changeover switch the signal indicator turns on. After 5 seconds the sensor resumes operation with

factory default settings.

After 5 minutes of inactivity the sensing range / sensitivity adjustment is locked. In order to reactivate the sensing range / sensi-

tivity adjustment, turn the sensing range /sensitivity adjuster for more than 180 degrees.

Approvals and certificates

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

CCC approval

CCC approval / marking not required for products rated ≤36 V

Curves/Diagrams

0

2

4

6

8

10

12

14

16

250

200

150

100

50

0

-50

-100

-150

-200

-250

X

H85-2

C110-2

H50

VR10

OFR100/100

Offset Y [mm]

Distance X [m]

Characteristic response curve

X

H85-2

C110-2

H50

VR10

OFR-100/100

Reflector type:

Excess gain > 2

Excess gain < 2

Excess gain

Relative received light strength (typical)

Distance X [m]

H85-2

C110-2

H50

0

5

10

15

20

20 mm

20 mm

20 mm

18.5 m

18 m

13.5 m

VR10

25 mm

7 m

OFR-100/100

250 m

6.3 m

1000

100

10

1

2

Functions and Operation