MODEL: R3Y-DA16A

R3Y-DA16A SPECIFICATIONS

ES-8965 Rev.7 Page 1/4

https://www.m-system.co.jp/

Remote I/O R3 Series

DISCRETE INPUT MODULE

(Di 16 points; with external excitation supply, connector

type)

109

[4.29]

27.5 [1.08]

130

[5.12]

mm [inch]

MODEL: R3Y–DA16A[1][2]

ORDERING INFORMATION

• Code number: R3Y-DA16A[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R3Y-DA16AW/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01)

NO. OF CHANNELS

16: 16

EXCITATION SUPPLY

A: External excitation

[1] COMMUNICATION MODE

S: Single

W: Dual

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R3-BSx)

Input: 40-pin connector (Fujitsu Model FCN-365P040-AU)

Internal power: Via the Installation Base (model: R3-BSx)

Isolation: Input to internal bus or internal power

Excitation monitor: Selectable with side DIP switch; ON/OFF

setting available

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Bi-color (red/green) LED;

Red with excitation abnormality;

Green in normal operating conditions.

Input status indicator: Red LED; turns on with the input ON.

Read rate: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec.

selectable with DIP SW

INPUT SPECIFICATIONS

Number of input: 16 points

Isolation: Optical isolator

Input resistance: Approx. 4.4 kΩ

Common: Positive or negative common (NPN/PNP) per 16

points

Rated input voltage: 24 V DC +10/-15 %

(ripple 5 %p-p max.)

Rated input current: Approx. 5 mA

ON voltage/current: ≥ 11 V, ≥ 2.5 mA

OFF voltage/current: ≤ 6 V, ≤ 1.3 mA

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

PERFORMANCE

Data allocation: 1

Current consumption: 80 mA

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(input to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)