MODEL: R6D-PF1

R6D-PF1 SPECIFICATIONS

ES-7781-AK Rev.2 Page 1/4

https://www.m-system.co.jp/

Remote I/O R6 Series

POWER SUPPLY MODULE

(Euro terminal)

Functions & Features

• Provides internal power needed for I/O and network

modules from power input

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: R6D–PF1–R[1]

ORDERING INFORMATION

• Code number: R6D-PF1-R[1]

Specify a code from below for [1].

(e.g. R6D-PF1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R6D-BS)

RUN contact output, power supply: Euro terminal block

(torque 0.3 N·m)

mm)

Internal power: Via the Installation Base (model: R6D-BS)

Housing material: Flame-resistant resin (black)

Isolation: RUN contact output to internal bus or internal

power or power input to FG

Power indicator LED: Green LED turns on when the power is

supplied.

RUN indicator: Orange LED turns on in normal

communication with the host PLC.

■ RUN CONTACT OUTPUT

RUN contact: Terminals (2 – 3) turns ON and (4 – 3) OFF in

normal communication with the host PLC;

Terminals (2 – 3) turns OFF and (4 – 3) ON in abnormal

communication.

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 150 W

Minimum load: 1 V DC @ 1 mA

driving an inductive load, external contact protection and

noise quenching recommended.

INSTALLATION

Power input

•DC: Operational voltage range 24 V DC ±10 % ripple 10 %

p-p max. Approx. 1 A with the maximum I/O extension

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R6D-BS)

Weight: 60 g (2.1 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (RUN contact

output to internal bus or internal power or power input to

FG)