MODEL: R5-MS

R5-MS SPECIFICATIONS

ES-6146 Rev.6 Page 2/3

http://www.m-system.co.jp/

FUNCTIONS

• Zero/Span Adjustment Modes

Run Mode

Normal operating mode

Input 0 % Adjustment Mode

Apply the actual 0% input and press SET.

Input 100 % Adjustment Mode

Apply the actual 100 % input and press SET.

• How to Operate

1) Start up in Monitor Mode (SW position = 0) and wait for 2

or 3 seconds.

2) Switch to another mode and go through the adjustments.

3) Reset the switch to the position ‘0’ so that the new

setting is stored in the internal memory.

• Cautions on the LEDs

1) Mode switching from Run to another mode becomes

effective when SET button is touched and the LED for the

respective mode starts blinking after the rotary switch

setting has been changed.

2) Mode switching back to Monitor becomes effective

automatically in a few seconds after the switch is reset to

‘0’ and is confirmed with the LED stopping blinking.

EXTERNAL VIEW

RUN LED

Zero/Span Adj.

Mode Selector

3

2

4 5 6

1 2 3

RUN

SET

SET Button

Euro Type

Connector Terminals