MODEL: R7F4HEIP-DC16B

R7F4HEIP-DC16B SPECIFICATIONS

ES-8005-C Rev.0 Page 1/5

https://www.m-system.co.jp/

Remote I/O R7F4HEIP Series

EtherNet/IP I/O MODULE

(PNP transistor output, 16 points, tension clamp terminal

block)

Functions & Features

• 16 points PNP transistor output module for EtherNet/IP

• Supports DLR (Device Level Ring) to form a ring topology

72 [2.83]

115 [4.53]

55 [2.17]

mm [inch]

MODEL: R7F4HEIP-DC16B-4-R[1]

ORDERING INFORMATION

• Code number: R7F4HEIP-DC16B-4-R[1]

Specify a code from below for [1].

(e.g. R7F4HEIP-DC16B-4-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

I/O TYPE

DC16B: PNP transistor output, 16 points

TERMINAL BLOCK: 4

Tension clamp terminal block for power supply

RJ-45 Modular jack for communication

Tension clamp terminal block for I/O

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: R7CFG)

• EDS file

The EDS file and configurator software are downloadable at

M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Connection

EtherNet/IP: RJ-45 Modular Jack

Power supply, exc. supply, output: Tension clamp terminal

Housing material: Flame-resistant resin (gray)

Isolation: Output or exc. supply to EtherNet/IP or FE to

power

Output at the loss of communication: Configurable via

R7CFG

Status indicator LED: PWR, LNK1, LNK2

(Refer to the instruction manual)

Discrete output status indicator LED: Green LED turns on

with output ON

EtherNet/IP COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: EtherNet/IP

Max. number of socket connections: 3

Connection type: Exclusive owner / Listen only / Input only

Transmission media: 10BASE-T (STP, Category 5), 100BASE-

TX (STP, Category 5e)

Network topology: Line, star and ring

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.250 (factory setting);

Only host address in IP address is configurable via rotary

switches, the other items via PC configurator software

(model: R7CFG).

DLR supported

Port No.: 2222, 44818

I/O data size: One (1) word

Status indicator LEDs: MS, NS (Refer to the instruction

manual for details)