R7E-MS4-R datasheet(2/31 Pages) MSYSTEM

2 / 31 page

MODEL: R7E

R7E SPECIFICATIONS

ES-7807 Rev.13 Page 2/31

http://www.m-system.co.jp/

RELATED PRODUCTS

• PC configurator software (model: R7CON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

• Clamp-on current sensor (model: CLSE)

For R7E-CT4E, the clamp-on current sensors must be

ordered separately. Required number depends upon the

channel number.

Note: PC Configurator Software is required to set IP address.

GENERAL SPECIFICATIONS

• Common Specifications

Power input: 24 V DC ±10 %; ripple 10 %p-p max.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute

(between isolated circuits)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Storage temperature: -20 to +65°C (-4 to +149°F)

Mounting: DIN rail (35 mm wide)

Connection

Ethernet: RJ-45 connector

Power & I/O: M3 separable screw terminals

(torque 0.5 N·m)

Screw terminal material: Nickel-plated steel

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Applicable wire size: 0.25 to 1.65 mm2 (AWG22 to 16)

Housing material: Flame-resistant resin (gray)

Status indicator LEDs: PWR, RUN

■ Current Consumption & Weight

R7E-DA16: Approx. 74 mA, 200 g (7.0 oz)

R7E-DC16A: Approx. 86 mA, 200 g (7.0 oz)

R7E-DC16B: Approx. 86 mA, 200 g (7.0 oz)

R7E-SV4: Approx. 97 mA, 200 g (7.0 oz)

R7E-TS4: Approx. 97 mA, 200 g (7.0 oz)

R7E-RS4: Approx. 97 mA, 200 g (7.0 oz)

R7E-MS4: Approx. 97 mA, 200 g (7.0 oz)

R7E-CT4E: Approx. 90 mA, 200 g (7.0 oz)

R7E-PA8: Approx. 80 mA, 200 g (7.0 oz)

R7E-YV2: Approx. 115 mA, 180 g (6.3 oz)

R7E-YS2: Approx. 161 mA, 180 g (6.3 oz)

R7E-EA8: Approx. 10 mA, 90 g (3.2 oz)

R7E-EA16: Approx. 20 mA, 150 g (5.3 oz)

R7E-EC8A: Approx. 10 mA, 90 g (3.2 oz)

R7E-EC16A: Approx. 20 mA, 150 g (5.3 oz)

R7E-EC8B: Approx. 10 mA, 90 g (3.2 oz)

R7E-EC16B: Approx. 20 mA, 150 g (5.3 oz)

■ Recommended solderless terminal

3.3 (.13) max

mm (inch)

ETHERNET COMMUNICATION

Physical layer standard: IEEE 802.3u

Data link layer: 10BASE-T / 100BASE-TX

Baud rate: 10 / 100 Mbps, Auto Negotiation

Protocol: Modbus/TCP

Data: RTU (binary)

Max. number of socket connections: Two (2)

Transmission media: 10BASE-T (STP cable, category 5)

100BASE-TX (STP cable, category 5e)

Max. segment length: 100 meters

IP address: 192.168.0.1 (factory setting); Selectable with PC

Configurator Software (model: R7CON)

Port No.: 502

Ethernet indicator LED: LINK, LINK100, COL

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

R7E-MS4-R 数据表(PDF) 2 Page - M-System Co.,Ltd.

R7E-MS4-R 数据表(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

数据表下载