R7D-DC16ASLASHQ datasheet(2/38 Pages) MSYSTEM

2 / 38 page

MODEL: R7D

R7D SPECIFICATIONS

ES-7802 Rev.21 Page 2/38

http://www.m-system.co.jp/

RELATED PRODUCTS

• PC configurator software (model: R7CON)

• EDS file

The EDS files for basic modules and configurator software

are downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

• Clamp-on current sensor (model: CLSE)

For R7D-CT4E, the clamp-on current sensors must be

ordered separately. Required number depends upon the

channel number.

GENERAL SPECIFICATIONS

• Common Specifications

Network power supply voltage: 11 – 25 V DC

(supplied through the network terminal)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute

(between isolated circuits)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Storage temperature: -20 to +65°C (-4 to +149°F)

Mounting: DIN rail (35 mm wide)

Connection

DeviceNet: Euro type connector terminal

Applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm

I/O: M3 separable screw terminals (torque 0.5 N·m)

Screw terminal material: Nickel-plated steel

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Applicable wire size: 0.25 to 1.65 mm2 (AWG22 to 16)

Housing material: Flame-resistant resin (gray)

■ Current Consumption at 24 V DC; at 11 V DC; Weight

R7D-DA16: Approx. 40 mA; 75 mA; 200 g (7.1 oz)

R7D-DC16A: Approx. 50 mA; 90 mA; 200 g (7.1 oz)

R7D-DC16B: Approx. 50 mA; 90 mA; 200 g (7.1 oz)

R7D-DC8C: Approx. 50 mA (60 mA); 90 mA; 200 g (7.1 oz)

R7D-RR8: Approx. 50 mA; 90 mA; 180 g (6.3 oz)

R7D-SV4: Approx. 60 mA; 110 mA; 200 g (7.1 oz)

R7D-TS4: Approx. 60 mA; 110 mA; 200 g (7.1 oz)

R7D-RS4: Approx. 60 mA; 110 mA; 200 g (7.1 oz)

R7D-MS4: Approx. 60 mA; 110 mA; 200 g (7.1 oz)

R7D-CT4E: Approx. 80 mA; 170 mA; 200 g (7.1 oz)

R7D-PA8: Approx. 40 mA; 70 mA; 200 g (7.1 oz)

R7D-YV2: Approx. 70 mA; 130 mA; 150 g (5.3 oz)

R7D-YV2A: Approx. 35 mA (40 mA); 60 mA; 150 g (5.3 oz)

R7D-YS2: Approx. 100 mA; 200 mA; 150 g (5.3 oz)

R7D-YS2A: Approx. 35 mA (70 mA); 55 mA; 150 g (5.3 oz)

R7D-EA8: Approx. 10 mA; 10 mA; 90 g (3.2 oz)

R7D-EA16: Approx. 20 mA; 20 mA; 150 g (5.3 oz)

R7D-EC8A: Approx. 10 mA; 20 mA; 90 g (3.2 oz)

R7D-EC16A: Approx. 30 mA; 60 mA; 150 g (5.3 oz)

R7D-EC8B: Approx. 10 mA; 20 mA; 90 g (3.2 oz)

R7D-EC16B: Approx. 30 mA; 60 mA; 150 g (5.3 oz)

The consumed current of supply power for the output is

shown in ().

■ Recommended solderless terminal

3.3 (.13) max

mm (inch)

DeviceNet COMMUNICATION

Network cable: Approved for DeviceNet

Baud rate setting: 125 kbps (default), 250 kbps, 500 kbps,

auto-tracking (rotary switch)

(Refer to the instruction manual.)

Status indicator LEDs: MS, NS

(Refer to the instruction manual for details.)

Node address setting: 1 - 63 (rotary switch, default:00)

(Refer to the instruction manual.)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

(R7D-DC8C only. Refer to the instruction manual for the

detailed information.)

EN 61010-1, EN 61010-2-201

Measurement Category II (output)

Pollution Degree 2

Output to communication: Basic insulation (150 V)

RoHS Directive

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

R7D-DC16A/Q 数据表(PDF) 2 Page - M-System Co.,Ltd.

R7D-DC16A/Q 数据表(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

数据表下载