R7F4DH-3DAC32B-R datasheet(2/77 Pages) MSYSTEM

2 / 77 page

MODEL: R7F4DH

R7F4DH SPECIFICATIONS

ES-7799 Rev.7 Page 2/77

http://www.m-system.co.jp/

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail or wall

Housing material: Flame-resistant resin (gray)

Status indicator: Power LED on with power supplied

Discrete I/O status indicator: Red LED on at contact on. (For

R7F4DH-x-DAC32x, input or output display is selected with

slide SW; factory setting: input display)

Communication Failure Detection: At communication error,

the output status until normal data is received (Hold or OFF)

can be set with the DIP SW. (only for output devices; factory

setting: Hold)

■ Current Consumption & Weight

R7F4DH-x-DA16A: Approx. 25 mA/100 g (0.22 lb)

R7F4DH-x-DA16B: Approx. 25 mA/100 g (0.22 lb)

R7F4DH-x-DC16A: Approx. 50 mA/100 g (0.22 lb)

R7F4DH-x-DC16B: Approx. 50 mA/100 g (0.22 lb)

R7F4DH-x-DAC16A: Approx. 35 mA/100 g (0.22 lb)

R7F4DH-x-DAC16B: Approx. 35 mA/100 g (0.22 lb)

R7F4DH-x-DAC16C: Approx. 35 mA/100 g (0.22 lb)

R7F4DH-x-DAC16D: Approx. 35 mA/100 g (0.22 lb)

R7F4DH-x-DAC32A: Approx. 40 mA/120 g (0.27 lb)

R7F4DH-x-DAC32B: Approx. 40 mA/120 g (0.27 lb)

R7F4DH-x-DAC32C: Approx. 40 mA/120 g (0.27 lb)

R7F4DH-x-DAC32D: Approx. 40 mA/120 g (0.27 lb)

(Discrete I/O load charge is not included in the above-

mentioned current consumption.)

HLS COMMUNICATION

Communication mode: Full-duplex or half-duplex

Network cable

Full-duplex communication:

ZHY262PS and ZHT262PS (Shinko Seisen Industry Co., Ltd.)

Half-duplex communication:

ZHY221PS (Shinko Seisen Industry Co., Ltd.)

Dual-shield cable:

ZHY262PBA (Shinko Seisen Industry Co., Ltd.)

Transmission distance:

12 Mbps: 100 meters (328 ft)

6 Mbps: 200 meters (656 ft)

3 Mbps: 300 meters (984 ft)

(Baud rate configurable with DIP SW; factory setting: 12

Mbps)

Terminating resistor: Built-in (Selected with the DIP SW;

factory setting: disabled)

Status indicator: Run LED on in normal communication

Station address: Set with rotary switch

(Refer to the instruction manual for details.)

STANDARDS & APPROVALS

Refer to the manuals to comply with the standards.

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

R7F4DH-3DAC32B-R 数据表(PDF) 2 Page - M-System Co.,Ltd.

R7F4DH-3DAC32B-R 数据表(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

数据表下载