MODEL: R7G

R7G SPECIFICATIONS

ES-7817 Rev.3 Page 1/6

http://www.m-system.co.jp/

Remote I/O R7 Series

GATEWAY MODULE

MODEL: R7G-SC-S[1]-R[2]

ORDERING INFORMATION

• Code number: R7G-SC-S[1]-R[2]

Specify a code from below for each [1] and [2].

(e.g. R7G-SC-SHL-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

Module type of network 1

S: Slave

Type of network 1

C: CC-Link

Module type of network 2

S: Slave

[1] Type of network 2

HL: HLS (Hi-speedLink System) Full-duplex

HL1: HLS (Hi-speedLink System) Half-duplex

POWER INPUT

DC Power

R: 24 V DC

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

FUNCTIONS & FEATURES

The Gateway Module for CC-Link and HLS (Hi-speedLink

System) connects discrete I/O between the networks each

other. The module hands over 32 point inputs of CC-Link to

32 point outputs of HLS or 32 point inputs of HLS to 32 point

outputs of CC-Link.

CAUTION

In this module, the transmission between CC-Link and HLS is

not synchronized. Therefore, if one of the networks read

the transmitted data before completion of its update by the

other network, the data may be uncertain as 16-bit data. If

the correct 16-bit data is necessary, arrange the host

application program.

Refer to the instruction manual.

GENERAL SPECIFICATIONS

Connection

• Power supply, CC-Link: Screwless spring terminal

Stripped length: 10 mm

Recommended solderless terminal

• HLS: RJ-45 Connectors

Recommended cable connector:

TM21P-88P (Hirose Electric)

(not included in the package)

Isolation: CC-Link or FG to HLS to power

Station address setting: Rotary switch

(For the detail refer to the instruction manual.)

Transfer rate

• CC-Link Rotary switch

• HLS DIP switch

(For the detail refer to the instruction manual.)

Power LED: Green LED turns on when the power is supplied.

Status indicator LED

• CC-Link: Red LEDs indicate communication status.

• HLS: Green LEDs indicate communication status.

COMMUNICATION

■ HLS COMMUNICATION

Network: Full-duplex or half-duplex

Transmission distance:

• 12 Mbps: 100 meters (328 ft)

• 6 Mbps: 200 meters (656 ft)