MODEL: SC110

SC110 SPECIFICATIONS

ES-6339 Rev.17 Page 1/12

http://www.m-system.co.jp/

Single Loop Controller Series

MULTI-FUNCTION PID CONTROLLER

(color LCD with touch-panel, MV output backup)

144

(5.67)

72

(2.83)

mm (inch)

*Selectable with option code

*

MODEL: SC110–[1]0–[2][3]

ORDERING INFORMATION

• Code number: SC110-[1]0-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. SC110-10-M2/3/M2/E/1/T/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] DISCRETE OUTPUT

1: Relay contact

2: Photo MOSFET relay

MODBUS

0:None

[2] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Housing Depth (must be specified)

/300: 300 mm (Discontinued, select /3)

/400: 400 mm (Discontinued, select /4)

/600: 600 mm (Discontinued, select /6)

/3: 300 mm

/4: 400 mm

/6: 600 mm

Backup Module Power Supply

blank: Single supply

/M2: 100 – 240 V AC (dual supply)

(Operational voltage range 85 – 264 V AC; 50/60 Hz)

/R: 24 V DC (dual supply)

(Operational voltage range 24 V DC ±10 %;

ripple 10 %p-p max.)

Control/Backup modules are powered from common terminals

with 'single' supply type; powered from independent

terminals with 'dual' supply type.

Language

blank: Japanese

/E: English

(Language (Japanese or English) can be chosen by front

panel setting.)

Configurator Interface

blank: Infrared

/1: Stereo jack

(If external noise interference is a concern, stereo jack

type is recommended.)

Terminal block

blank: One block terminal

/T: Separable terminal

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

FUNCTIONS & FEATURES

Functions & Features

• Color LCD with touch panel

• Five Operation views (digital display, bargraph, dual-loop

bargraph, short trend and user's parameter table views)

• Enhanced screen functions for engineering (configuration,

programming and tuning views)

• Universal input x 2 points, analog input x 4 points,

discrete input x 6 points, pulse input x 5 points, high speed

pulse input x 1 point

• Current output (4-20 mA) x 2 points, voltage output (1-5

V) x 2 points, relay or photo-MOSFET relay output x 5 points

• RUN contact output (relay) x 1 point

• Computation cycle selectable between 50 msec. and 3

sec. (control cycle selectable between 1 and 64 times of the

computation cycle)

• Two PID function blocks