MODEL: R80NECT1

R80NECT1 SPECIFICATIONS

ES-7022 Rev.2 Page 1/4

http://www.m-system.co.jp/

Remote I/O R80 Series

POWER/NETWORK MODULE

(EtherCAT)

Functions & Features

• Free combination of analog and discrete I/O

• Space-saving

EtherCAT® is a registered trademark and patented

technology, licensed by Beckhoff Automation GmbH,

Germany.

(mm)

50 (1.97)

115 (4.53)

73 (2.87)

MODEL: R80NECT1–R[1]

ORDERING INFORMATION

• Code number: R80NECT1-R[1]

Specify a code from below for [1].

(e.g. R80NECT1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

MODULE TYPE

NECT1: EtherCAT

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R80CFG)

• ESI file

The ESI file and configurator software are downloadable at

M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

PACKAGE INCLUDES...

• Protective cover

GENERAL SPECIFICATIONS

Connection

• Power input and excitation supply: Tension clamp terminal

block (Front Twin connection)

• EtherCAT: RJ-45 modular jack

• Internal bus, internal power and excitation supply: Via bus

connector

Max. number of I/O modules: 16

(Max. consumption current of I/O modules: 1.6 A)

Isolation: Internal bus or internal power or power input to

excitation supply to EtherCAT or FE1

Status indicator LEDs: PWR, RUN, ERR, L/A IN, L/A OUT

(For details, refer to the operating manual.)

EtherCAT COMMUNICATION

Standard: IEEE 802.3u

Transmission type: 100BASE-TX

Transmission speed: Full-duplex 100 Mbps

Transmission media: 100BASE-TX (STP cable; Category 5e)

Maximum internode length: 100 meters

Fixed address: Set with rotary switches

(The master must support MDP.)

INSTALLATION

Power consumption

•DC: Approx. 12 W 24 V DC (@ internal power max. current

1.6 A) )

Internal power supply (power supply for I/O module):

• DC power supply: 5 V DC

• Current capacity: 1.6 A

Excitation supply output (excitation for I/O module)

• DC: 24 V DC ±10 %

• Operational current: 10 A

(From power and excitation supply connector, via

connector for internal bus, supplied to each I/O module.

Power output current consumption must be under

operational current.)