CP37xx-0010

https://www.beckhoff.com/cp37xx-0010

Technical changes reserved

As of 23.06.2021 | Site 4 of 5

C9900-E248

IP 65 connector M12 in the wiring area of a CP32xx, CP37xx or CP72xx for one serial

interface RS422, optically linked, overload protection. Configuration as a full duplex end

point: echo on, auto send off, always send on, auto receive off, always receive on,

termination on

C9900-E261

IP 65 connector M12 in the wiring area of a CP32xx, CP37xx or CP72xx for one serial

interface RS485, optically linked, overload protection. Configuration as an end point

without echo: echo off, auto send on, always send off, auto receive on, always receive

off, termination on

C9900-H583

40 GB CFast card, 3D flash, extended temperature range

C9900-H587

80 GB CFast card, 3D flash, extended temperature range

C9900-H624

160 GB CFast card, 3D flash, extended temperature range

C9900-H586

40 GB CFast card, 3D flash, extended temperature range, instead of 20 GB CFast card

C9900-H590

80 GB CFast card, 3D flash, extended temperature range, instead of 20 GB CFast card

C9900-H627

160 GB CFast card, 3D flash, extended temperature range, instead of 20 GB CFast card

C9900-U209

uninterruptible power supply UPS, integrated into the 24 V power supply, without battery

C9900-S706

TwinCAT 2 PLC runtime for Windows Embedded Compact 7

C9900-S707

TwinCAT 2 NC PTP runtime for Windows Embedded Compact 7

C9900-S708

TwinCAT 2 NC I runtime for Windows Embedded Compact 7

Options

To connect a keyboard to the PC, e.g. at commissioning, one of the following USB sockets

is required:

C9900-E279

1-port USB 3.0 connector with IP 65 screw cap in the sidewall of the CP32xx or CP37xx

from version -0010

C9900-E281

1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the CP32xx-0000 or

CP37xx-0010 PC housing

C9900-E283

IP 65 connector in the wiring area of a CP32xx, CP37xx or CP72xx for a USB 3.0 port,

Harting push-pull USB 3.0 socket

C9900-E187

IP 65 connector M12 in the wiring area of a CP32xx, CP37xx or CP72xx for one USB 2.0

port

C9900-E190

USB-A in the wiring area of a CP32xx, CP37xx or CP72xx for one USB 2.0 port, including

covering cap IP 65

C9900-E304

USB A socket in the wiring area of a CP32xx or CP37xx for one USB 3.0 port, including

covering cap IP 65

Accessories

Accessories

C9900-K271

power supply cable IP 65 for CP32xx, CP37xx or CP72xx, length 5 m, assembled, M23

connector, screw type, 8 wires, second end open

C9900-K272

power supply cable IP 65 for CP32xx, CP37xx or CP72xx, length 10 m, assembled, M23

connector, screw type, 8 wires, second end open

C9900-K275

power supply cable IP 65 for CP32xx and CP37xx or CP72xx, length 5 m, 12 wires: 24 V

plus, 24 V minus, battery plus and battery minus each 2 x 1 mm² for low voltage drop,

assembled, M23 connector, screw type, second end open