| 数据搜索系统,热门电子元器件搜索 |
|
M40Z300AV 数据表(PDF) 4 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M40Z300AV 数据表(HTML) 4 Page - STMicroelectronics |
|
4 / 20 page ![]() M40Z300AV 4/20 DESCRIPTION The M40Z300AV NVRAM SUPERVISOR is a self- contained device which converts a standard low- power SRAM into a non-volatile memory. A preci- sion voltage reference and comparator monitors the VCC input for an out-of-tolerance condition. When an invalid VCC condition occurs, the condi- tioned chip enable outputs (E1CON to E4CON) are forced inactive to write-protect the stored data in the SRAM. During a power failure, the SRAM is switched from the VCC pin to the lithium cell within the SNAPHAT® to provide the energy required for data retention. On a subsequent power-up, the SRAM remains write protected until a valid power condition returns. The 28-pin, 330mil SOIC provides sockets with gold plated contacts for direct connection to a sep- arate SNAPHAT housing containing the battery. The SNAPHAT housing has gold plated pins which mate with the sockets, ensuring reliable connection. The housing is keyed to prevent im- proper insertion. This unique design allows the SNAPHAT battery package to be mounted on top of the SOIC package after the completion of the surface mount process which greatly reduces the board manufacturing process complexity of either directly soldering or inserting a battery into a sol- dered holder. Providing non-volatility becomes a “SNAP.” The 16-pin SOIC provides battery pins for an external user-supplied battery. Insertion of the SNAPHAT housing after reflow prevents potential battery damage due to the high temperatures required for device surface-mount- ing. The SNAPHAT housing is also keyed to pre- vent reverse insertion. The 28-pin SOIC and battery packages are shipped separately in plastic anti-static tubes or in Tape & Reel form. For the 28-lead SOIC, the bat- tery/crystal package (e.g., SNAPHAT) part num- ber is “M4ZXX-BR00SH” (see Table 13., page 18). Caution: Do not place the SNAPHAT battery top in conductive foam, as this will drain the lithium button-cell battery. Figure 3. Logic Diagram Note: 1. For 16-pin SOIC package only. 2. THS pin must be connected to VSS. Table 1. Signal Names Note: 1. THS pin must be connected to VSS. 2. For M40Z300AV, B– must be connected to the negative battery terminal only (not to Pin 8, VSS). AI08893 THS (2) VCC M40Z300AV BL VSS E VOUT B A E1CON E2CON E3CON E4CON RST B+ (1) B– (1) THS(1) Threshold Select Input E Chip Enable Input E1CON - E4CON Conditioned Chip Enable Output A, B Decoder Inputs RST Reset Output (Open Drain) BL Battery Low Output (Open Drain) VOUT Supply Voltage Output VCC Supply Voltage VSS Ground B + Positive Battery Pin B –(2) Negative Battery Pin NC Not Connected Internally |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |