Issue:1836

In the effort to improve our products, we reserve the right to make changes judged to be necessary.

CONFIDENTIAL AND PROPRIETARY INFORMATION

This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.

Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or

use without specific written authorization of Pulse is strictly forbidden.

Description: UltraThin, clear radome

antenna for iDAS

PART NUMBER: DASUTCCxxx

Series: CLARITY

21

ASSEMBLY

If using the reflector, thread the reflector onto the Antenna Stem before

attaching the connectors. See Figure 2.

ADDITIONAL NOTES:

Some customers may chose to take into consideration the antenna

propagation orientation during their planning process. The Horizontal rotation

alignment mark (Phi=0 deg), along with data from iBwave file will support this.

For Optimum Performance, Metal ceiling rails need to be a minimum

200mm from the - antenna center as the antenna requires 400mm x 400mm

space free of any metal.

N Female: Maximum Torque 6.2-9.74 in-lbs (0.7-1.1Nm)

Mini-DIN: Maximum torque 12-16 ft Lbs (17-22Nm)

4.3-10 DIN: Maximum torque 45-70 in-lbs (5-8Nm)