Maxim Integrated │ 4

www.maximintegrated.com

USB2PMB2# Adapter Board

Evaluates: Munich (USB2PMB2#)

Scan and Select

For instance, Figure 5 depicts the scanning and available

Munich devices connected. The software has identified

two devices:

a) PMOD872134A

b) PMOD961478A

Within the tab sheet, press the Connect button and verify

that the button changes its text to Disconnect and the sta-

tus bar at the bottom indicates that the companion board

is connected. See Figure 6.

Connecting Multiple Boards

When connecting multiple boards such as Campbell

and Cupertino at the same time to two separate Munich

boards, perform Steps 1 to 3 for each device one after

the other.

Figure 7 depicts Campbell and Cupertino being con-

nected to two Munich adaptor boards at the same time.

Campbell GUI Tab

This environment contains the internal block diagram

of the Campbell board and the following operations to

perform:

● Sample Once and Sample Continuously

● Choose Sample Rate and Sample Count

● View Plots

● Average

● Calibrate

● Plot Configuration Options

Figure 6. Campbell Connected to Munich GUI