Evaluates: MAX31825

MAX31825 Evaluation System

General Description

The MAX31825 evaluation system (EV system) demon-

hardware-selectable address and alarm. The MAX31825

EV system includes the MAX31825 evaluation kit (EV kit)

patible software provides a user-friendly interface that

demonstrates the features of the MAX31825.

The MAX31825 EV kit contains an on-board DS2482

MAX31825ANT+ installed.

Features

● Proven PCB Layout

● Fully Assembled and Tested

● Windows XP, Windows 7/8/8.1/10-Compatible

Software

319-100517; Rev 1; 3/20

Ordering Information appears at end of data sheet.

1-Wire is a registered trademark of Maxim Integrated Products,

Inc.

Windows is a registered trademark of Microsoft Corporation.

Quick Start

Required Equipment

● MAX31825 EV system (USB cable included)

● Windows PC

● MAX31825GUISetup.msi file

Note: In the following sections, software-related items are

identified by bolding. Text in

bold refers to items directly

from the EV kit software. Text in

bold and underlined

refers to items from the Windows operating system.

Procedure

The EV system is fully assembled and tested. Follow the

steps below to verify board operation:

1) Install the MAX31825GUISetup.msi software on a

computer.

2) Align the X2 connector (top row) of the USB2PMB2

with the J1 connector of the MAX31825 EV kit.

Figure 1 shows the side view of how the two boards

are connected. The USB2PMB2 is on the left and the

MAX31825 EV kit is on the right.

MAX31825 EV System Photo

Click

here for production status of specific part numbers.