Maxim Integrated │ 2

www.maximintegrated.com

Evaluates: MAX38904D

MAX38904D WLP Evaluation Kit

Detailed Description of Hardware

The MAX38904D WLP EV kit evaluates the MAX38904D

in a WLP package. The MAX38904D is a low noise

linear regulator that delivers 2A of output current with

This regulator requires only 100mV of input-to-output

headroom at full load.

The MAX38904D WLP EV kit operates over an input

range of 1.7V to 5.5V. The EV kit comes with the

MAX38904DANL15+ installed and the output voltage is

factory preset to 1.5V. The EV kit output can be reconfigured

to other voltages from 0.7V to 5.0V in 50mV steps by

replacing U1 with another MAX38904D, preset to the

desired voltage level. Refer to the MAX38904 IC data

sheet for the MAX38904D output voltage selection.

EN (Enable)

The EV kit provides a jumper JU1 to enable or disable

the MAX38904D. Refer to Table 1 for jumper setting of

jumper JU1.

Table 1. EN (JU1)

*Default position.

#Denotes RoHS

Note: Indicate that you are using the MAX38904D when

contacting these component suppliers.

SUPPLIER

WEBSITE

Kemet

www.kemet.com

Murata/TOKO

www.murata.com

TDK

www.tdk.com

Samsung Electro-Mechanics

America. Inc.

www.samsungsem.com

PART

TYPE

MAX38904DEVK#WLP

EV Kit

SHUNT POSITION

DESCRIPTION

1-2*

Enabled. EN = IN*

2-3

Disabled. EN = GND

Ordering Information

Component Suppliers