UB-PROG2

2

Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Programming unit

Programming device

• For ultrasonic sensors UB... whose Teach-In input is on pin 2.

• Easy Teach-In of the switching points A1/A2 or the measuring window.

• Easy selection of the output function:

- Window mode, NO/NC function.

- One switching point, NO/NC function.

- Monitoring of the detection range.

The unit can be switched from the cable connection socket and the plug connection on the sensor for the Teach-In procedure.

The switch points/measuring window and output function can be taught in using the A1 and A2 buttons. For detailed information

on the procedure see the sensor data sheet.

The taught-in switch points and functions are retained when the programming unit is removed and/or the power is switched off.

Teach-In