TL082ACD datasheet(10/75 Pages) TI

10 / 75 page

6 Specifications

6.1 Absolute Maximum Ratings: TL08xH

over operating ambient temperature range (unless otherwise noted) (1)

MIN

MAX

UNIT

Supply voltage, VS = (VCC+) – (VCC–)

Signal input pins

Common-mode voltage (3)

(VCC–) – 0.5

(VCC+) + 0.5

Differential voltage (3)

VS + 0.2

Current (3)

–10

Output short-circuit (2)

Continuous

Operating ambient temperature, TA

–55

150

°C

Junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

Short-circuit to ground, one amplifier per package.

(3)

Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be

current limited to 10 mA or less.

6.2 Absolute Maximum Ratings: All Other Devices

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

VCC+ -

VCC-

Supply voltage(2)

-18

VID

Differential input voltage(3)

-30

+30

Input voltage(2) (4)

-15

+15

Duration of output short circuit(5)

Unlimited

Continuous total power dissipation

See Section 6.15

Tstg

Storage temperature

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.

(3)

Differential voltages are at IN+, with respect to IN−.

(4)

The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.

(5)

The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

6.3 ESD Ratings: TL08xH

VALUE

UNIT

TL084H

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±1500

Charged-device model (CDM), per JEDEC specification JESD22-C101 (2)

±1000

TL082H and TL081H

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

Charged-device model (CDM), per JEDEC specification JESD22-C101 (2)

±1000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

TL081, TL081A, TL081B, TL081H

TL082, TL082A, TL082B, TL082H

TL084, TL084A, TL084B, TL084H

SLOS081L – FEBRUARY 1977 – REVISED JULY 2021

www.ti.com

Submit Document Feedback

Product Folder Links: TL081 TL081A TL081B TL081H TL082 TL082A TL082B TL082H TL084 TL084A TL084B

TL084H

TL082ACD 数据表(PDF) 10 Page - Texas Instruments

TL082ACD 数据表(HTML) 10 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

数据表下载

链接网址

TL082ACD 数据表(PDF) 10 Page - Texas Instruments

TL082ACD 数据表(HTML) 10 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

数据表 下载

链接网址

数据表下载