USB5906CSLASHKD datasheet(14/64 Pages) MICROCHIP

14 / 64 page



2016-2021 Microchip Technology Inc.

DS00002242E-page 14

USB5906

TABLE 3-5:

SPI INTERFACE

Name

Symbol

Buffer

Type

Description

SPI Chip Enable

SPI_CE_N

I/O12

This is the active low SPI chip enable output. If the SPI

interface is enabled, this pin must be driven high in

power-down states.

SPI Clock

SPI_CLK

I/O-U

This is the SPI clock out to the serial ROM. If the SPI

interface is disabled, by setting the SPI_DIS-ABLE bit in

the UTIL_CONFIG1 register, this pin becomes

GPIO4. If

the SPI interface is enabled this pin must be driven low

during reset.

SPI Data Output

SPI_DO

I/O-U

SPI data output, when configured for SPI operation.

SPI Data Input

SPI_DI

I/O-U

SPI data input, when configured for SPI operation.

Note:

If SPI memory device is not used, these pins may not be simply floated. These pins must be handled per

their respective alternate pin functions descriptions (CFG_BC_EN and CFG_NON_REM).

TABLE 3-6:

USB TYPE-C CONNECTOR CONTROLS

Name

Symbol

Buffer

Type

Description

USB Type-C

Attach Control

Input 0-2

C_ATTACH[0:2]

(PD)

“Type-C Control Mode 1” USB Type-C attach control

input.

This pin indicates to the hub when a valid USB Type-C

attach has been detected. This pin is used by the hub to

enable the USB 3.2 Gen 1 PHY when a Type-C connec-

tion is present. When there is no USB Type-C connection

present, the USB 3.2 Gen 1 PHY is disabled to reduce

power consumption.

The polarity of this input is controlled via the

CC_POL

pin. If

CC_POL is low, this pin behaves as follows:

- 1: USB Type-C attach detected, turn respective

USB 3.2 Gen 1 PHY on.

- 0: No USB Type-C attach detected, turn respec-

tive USB 3.2 Gen 1 PHY off.

CC_POL is high, this pin behaves as follows:

- 1: No USB Type-C attach detected, turn respec-

tive USB3.1 Gen 1 PHY off.

- 0: USB Type-C attach detected, turn respective

USB3.1 Gen 1 PHY on.

When using legacy USB Type-A and Type-B connectors,

pull these pins to 3.3V to permanently enable all USB 3.2

PHYs.

USB5906C/KD 数据表(PDF) 14 Page - Microchip Technology

USB5906C/KD 数据表(HTML) 14 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

数据表下载

链接网址

USB5906C/KD 数据表(PDF) 14 Page - Microchip Technology

USB5906C/KD 数据表(HTML) 14 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

数据表 下载

链接网址

数据表下载