(Voltage Referenced to V-)

V+ ......................................................................... -0.3V, +44V

GND...................................................................... -0.3V, +25V

Digital Inputs, NO, COM (Note 1) ........ (V- - 2V) to (V+ + 2V) or

30mA (whichever occurs first)

Continuous Current (any terminal) .....................................30mA

Peak Current, NO or COM

(pulsed at 1ms, 10% duty cycle max) ..........................100mA

Plastic DIP (derate 9.09mW/°C above +70°C)............727mW

Wide SO (derate 12.50mW/°C above +70°C)...........1000mW

PLCC (derate 10.53mW/°C above +70°C)..................842mW

CERDIP (derate 16.67mW/°C above +70°C)............1333mW

TSSOP (derate 12.8mW/°C above +70°C) ...............1025mW

Operating Temperature Ranges

MAX30_C_ _ ......................................................0°C to +70°C

MAX30_E_ _ .................................................. -40°C to +85°C

MAX30_MJI .................................................. -55°C to +125°C

Storage Temperature Range............................ -65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Soldering Temperature (reflow)

PDIP, Wide SO, TSSOP lead(Pb)-free........................+260°C

PDIP, Wide SO, TSSOP containing lead(Pb)..............+240°C

PLCC lead(Pb)-free .....................................................+245°C

PLCC containing lead(Pb)...........................................+225°C

CERDIP .......................................................................+240°C

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

(Note 2)

MAX

UNITS

SWITCH

Analog Signal Range

(Note 3)

-15

+15

V

On-Resistance

60

100

Ω

125

On-Resistance Matching

Between Channels

1.5

5

Ω

8

On-Resistance Flatness

1.8

7

Ω

10

NO Off-Leakage Current

(Note 5)

-0.5

+0.01

+0.5

nA

C, E

-2.5

+2.5

M

-5.0

+5.0

COM Off-Leakage Current

(Note 5)

MAX306

-0.75

+0.02

+0.75

nA

C, E

-20

+20

M

-40

+40

MAX307

-0.75

+0.02

+0.75

C, E

-10

+10

M

-20

+20

MAX306/MAX307

Precision, 16-Channel/Dual 8-Channel,

High-Performance, CMOS Analog Multiplexers

www.maximintegrated.com

Maxim Integrated │ 2

Note 1: Signals on NO, COM, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to

maximum current ratings.

Absolute Maximum Ratings

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these

or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Electrical Characteristics—Dual Supplies