1.3. Software Requirements and Support

•

Windows 7/8 (32-bit and 64-bit)

•

Windows XP (32-bit and 64-bit)

•

Windows Server 2008 R2 (64-bit)

•

Linux platforms such as Red Hat Enterprise 5

Note:

Quartus Prime software version 13.1 supports most of the download cable’s

capabilities. If you use this version, install the latest patch for full compatibility.

The download cable also supports the following tools:

•

Quartus Prime Programmer (and stand-alone version)

•

•

JTAG and debug tools supported by the JTAG Server. For example:

— System Console

— Nios II debugger

— ARM DS-5 debugger

1.4. Installing the Intel FPGA Download Cable II for Configuration

or Programming

1. Disconnect the power cable from the circuit board.

2. Connect the cable to the USB port on your computer and to the download cable

port.

3. Connect the cable to the 10-pin header on the device board.

4. Reconnect the power cable to reapply power to the circuit board.

1. Setting Up the Intel FPGA Download Cable II

UG-01150 | 2018.04.19

Intel FPGA Download Cable II User Guide

Send Feedback

4