Features

•

•

Nominal power: up to 1200 W

•

Nominal current: up to 7 A

•

Input auxiliary voltage: up to 20 V DC

•

Single- or three- shunt resistors for current sensing (with sensing network)

•

Two options for current sensing: dedicated op-amps or through MCU

•

Overcurrent hardware protection

•

IPM temperature monitoring and protection

•

Hall sensor or encoder input

•

of SLLIMM™ IPMs

•

Motor control connector (32-pin) to interface with ST MCU boards

•

Universal conception for further evaluation with breadboard and testing pins

•

Very compact size

•

RoHS compliant

Description

The STEVAL-IPM10B is a compact motor drive power board based on the SLLIMM™

provides an affordable, easy-to-use solution for driving high power motors for a wide

range of applications such as white goods, air conditioners, compressors, power

fans, high-end power tools, and generally 3-phase inverters for motor drives. The

IPM itself consists of short-circuit rugged IGBTs and a wide range of features

including undervoltage lockout, smart shutdown, temperature sensing and NTC

inside, and overcurrent protection.

The main characteristics of this evaluation board are its small size, minimal BOM and

capacitors, snubber capacitor, hardware short-circuit protection, fault event signal,

temperature monitoring. In order to increase its flexibility, it was designed to work in

single or three-shunt configuration and with double current sensing options such as

three dedicated op-amps on-board, or op-amps embedded on MCU. Hall/Encoder

part completes the circuit.

Thanks to these advanced characteristics, the system has been specifically designed

to achieve accurate and fast conditioning of the current feedback, matching the

typical requirements for field-oriented control (FOC).

The STEVAL-IPM10B is compatible with ST’s STM32-based control board, providing

a complete platform for motor control.

Product summary

STEVAL-IPM10B

compact motor drive

power board

STEVAL-IPM10B

STGIB10CH60TS-L

SLLIMM™ 2nd

series IPM

STGIB10CH60TS-

L

1200 W motor control power board based on STGIB10CH60TS-L SLLIMM™ 2nd

series IPM

STEVAL-IPM10B

Data brief

DB2739 - Rev 4 - September 2019

For further information contact your local STMicroelectronics sales office.

www.st.com