These respirators help protect against certain airborne

contaminants.

Misuse may result in sickness or death.

For proper use, the wearer must read and understand User

Instructions provided as a part of product packaging, see supervisor, or call 3M PSD Technical Service,

1-800-243-4630. Time use limitations may apply.

Important — Before using these respirators, you must determine the following:

1. The type of contaminant(s) for which the respirator is being selected.

2. The concentration level of contaminant(s).

3. Whether the respirator can be properly fitted on the wearer’s face. All respirator instructions,

warnings and use and time limitations must also be read and understood by the wearer before use.

Before use of these respirators, a written respiratory protection program must be implemented,

meeting all the requirements of OSHA 29 CFR 1910.134, including training and fit testing.

For More Information

Personal Safety Division

3M Center, Building 235-2W-70

St. Paul, MN 55144-1000

3M, Scotchgard and Cool Flow

are trademarks of 3M Company,

used under license in Canada.

Please recycle. Printed in U.S.A.

© 2013 3M Company.

All Rights Reserved.

70-0710-9082-6

All 3M Particulate Filters and Gas/Vapor Cartridges can be used interchangeably

Part Number Description

2071

Particulate Filter, P95

2076HF

Particulate Filter, Hydrogen Fluoride/P95, with Nuisance Level Acid Gas Relief*

2078

Particulate Filter, P95, with Nuisance Level Organic Vapor/Acid Gas Relief*

2091

Particulate Filter, P100

2096

Particulate Filter, P100, with Nuisance Level Acid Gas Relief*

2097

Particulate Filter, P100, with Nuisance Level Organic Vapor Relief*

2291

Advanced Particulate Filter, P100

2296

Advanced Particulate Filter, P100, with Nuisance Level Acid Gas Relief*

2297

Advanced Particulate Filter, P100, with Nuisance Level Organic Vapor Relief*

7093

Particulate Filter, P100

7093B

Particulate Filter, P100, Bulk

7093C

Cartridge/Filter, Hydrogen Fluoride, P100 with Nuisance Level Organic

Vapor and Acid Gas Relief*

6001

Cartridge, Organic Vapor

6002

Cartridge, Acid Gas**

6003

Cartridge, Organic Vapor/Acid Gas**

6004

Cartridge, Ammonia/Methylamine

6005

Cartridge, Formaldehyde/Organic Vapor

6006

Cartridge, Multi Gas/Vapor**

6009

Cartridge, Mercury Vapor or Chlorine

60921

Cartridge/Filter, Organic Vapor/P100

60922

Cartridge/Filter, Acid Gas/P100**

60923

Cartridge/Filter, Organic Vapor/Acid Gas/P100**

60924

Cartridge/Filter, Ammonia/Methylamine/P100

60925

Cartridge/Filter, Formaldehyde/Organic Vapor/P100

60926

Cartridge/Filter, Multi-Gas/Vapor/P100**

60928

60929

Cartridge/Filter, Mercury Vapor/Chlorine Gas/P100

• Lightweight and easy to

breathe through

• Assortment of filters available

for a wide range of applications

• Easier breathing through new

3-layer advanced Electret Filter

Media in 2200 Series Filters

* 3M recommended for relief against nuisance levels of organic vapors and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL

or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or organic vapors (except hydrogen fluoride).

* Reminder: These cartridges are approved for respiratory protection from hydrogen sulfide gas up to 10 times the permissible exposure limit (PEL) with half facepiece respirators

and full facepiece respirators when qualitatively fit tested, or up to less than 300 parts per million (ppm) with full facepiece respirators when quantitatively fit tested or

according to specific OSHA standards or applicable government regulations, whichever is lower. 300 ppm is the concentration considered Immediately Dangerous to Life or

Health (IDLH) for hydrogen sulfide.

†

As recommended by the California Department of Pesticide Regulation No. 01-009-Methyl Bromide Field Fumigation. 3M recommended for use against radioiodine and

methylbromide. Note: not NIOSH approved for methylbromide or radioiodine.

• Unique, spring-loaded filter cover design

simplifies negative pressure user seal checks

• Swept-back design provides enhanced field

of view and greater comfort

• 7093C offers a lightweight, low profile design

that combines P100 filtration with carbon-loaded

features found in heavier combination cartridge products

• Low-profile design helps

maintain good field of vision

• Full range of cartridges to meet

your needs

• Particulate filter is permanently

attached to cartridge for easy,

one-step assembly

• Unique design for enhanced

comfort and visibility

Technical Service

1-800-243-4630

Technical Service

1-800-267-4414

Technical Service

1-800-3M-HELPS

Customer Service

1-800-328-1667

3M Canada Customer Care

1-800-364-3577

Internet

www.3M.com/PPESafety

Internet

www.3M.ca/safety

In the United States, contact:

In Canada, contact:

For other 3M products:

*