www.panduit.com

applications

Category 6/Class E

Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6 and

channel performance:

ISO 11801 Class E standards at swept frequencies 1 to 250 MHz

FCC and

Meets ANSI/TIA-1096-A; contacts plated with 50 microinches of gold

ANSI compliance:

for superior performance

IEC compliance:

Meets IEC 60603-7

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

RoHs compliance:

Compliant

UL rated:

UL 1863 approved

technical information

specifications

Category 6/Class E, 8-position, female to female,

UTP coupler module shall provide easy plug and

play pass through connectivity. Coupler modules

shall act as one connecting hardware component in

the channel. Coupler modules shall be available

individually or installed in a 24-port flat patch panel.

Couplers shall be compatible with 6 or 8-position

RJ45 UTP patch cords with T568A and T568B

wiring schemes.

and Patch Panels are a component of the

This end-to-end system is interoperable and

backwards compatible, providing design

flexibility to protect network investments well

into the future. Couplers are designed to

perform as one connector in the channel,

allowing up to 4 couplers in each channel

to be used while maintaining channel

performance. Couplers are a reliable, modular

solution, ideal when setting up networks in a

testing environment or during a planned

system upgrade. With certified performance to

the ANSI/TIA-568-C.2 Category 6 and ISO

11801 Class E standards, this system will

support the following applications:

• Ethernet 10BASE-T, 100BASE-T (Fast

Ethernet), 1000BASE-T (Gigabit Ethernet)

• 155 Mb/s ATM, 622 Mb/s ATM, 1.2

Gb/s ATM

• Token Ring 4/16

• Digital video and broadband/baseband

analog video

• Voice over Internet Protocol (VoIP)

key features and benefits

100% performance

Confidence that each coupler will deliver the critical electrical

tested

performance requirements

Modular

Patch Panels and industrial bulkheads for easy moves, adds

and changes

RJ45 interface

Industry standard interface provides a quick and easy plug and play

connection to RJ45 patch cords; backwards compatible

Identification

Can be clearly identified with optional labels and icons for

port identification

Populated patch

Factory installed 24-port patch panel mounts to standard EIA 19"

panel version or 23" racks for greater system flexibility

Blockout device

Provides a simple and secure method to control access to data

(optional)

ports while not in use

Modules and Patch Panel

SPECIFICA TION SHEET

Copper Cabling System

Coupler Modules

Coupler Module:

Coupler Patch Panel

24-port, 1 RU:

CP24688BLY

Plenum:

PUP6504*-UY

Riser:

PUR6504*-UY

Plenum:

PUP6004*

Riser:

PUR6004*

LSZH (60332-1):

PUL6004*

LSZH (60332-3):

PUZ6004*

CM:

PUC6004*

CM

(foot lengths):

UTPSP^Y

CM

(meter lengths):

UTPSP^^MY

LSZH

(meter lengths):

UTPSPL^^MY

Patch Panels

24-port, 1 RU:

CPPLA24WBLY

48-port, 2 RU:

CPPLA48WBLY

Patch Panels

24-port, 1 RU:

CPPL24WBLY

48-port, 2 RU:

CPPL48WBLY

For additional modular and punchdown patch

panels, visit www.panduit.com.

Accessories

Industrial

bulkhead:

IAEBH

Clear dust cap:

MDC-C

Blockout device:

PSL-DCJB-^^^

Phone icons:

CIPIW-C+

Data icons:

CIDIW-C+

BU (Blue), GR (Green), OR (Orange), RD (Red), IG

(International Gray) or YL (Yellow).

* To designate color, add suffix BU (Blue) or WH

(White). For additional cable colors, contact customer

service.

^ For lengths 1 to 20 feet (one foot increments) and 25,

30, 35, 40 feet, change the length designation in the

part number to the desired length. For standard cable

colors other than Off White, add suffix BL (Black), BU

(Blue), RD (Red), YL (Yellow), GR (Green), OR

(Orange) or VL (Violet). For example, the part number

for a blue 15-foot patch cord is UTPSP15BUY.

^^ For lengths 1 to 10 meters (one meter increments)

and 2.5, 15, 20, 25, 30, 35, 40 meters, change the

length designation in the part number to the desired

length. For standard cable colors other than Off White,

add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow),

GR (Green), OR (Orange) or VL (Violet). For example,

the part number for a blue15-meter patch cord is

UTPSP15MBUY.

^^^To designate color other than Red, add suffix

BL (Black), BU (Blue), YL (Yellow), GR (Green), OR

(Orange), IW (Off White) or IG (International Gray) at

the end of the part number. 10/package.

+To designate color other than IW (Off White), replace

IW with EI (Electric Ivory), IG (International Gray), BL

(Black), BU (Blue), RD (Red), YL (Yellow), GR (Green),

OR (Orange) or VL (Violet) in the part number.

100/package.