www.panduit.com

specifications

Category 5e/Class D, 8-position, UTP jack module shall terminate 4-pair, 22 – 26

AWG, 100 ohm unshielded twisted pair cable and shall not require use of a punchdown

tool. UTP jack modules shall use a forward motion termination method to optimize

performance by maintaining cable pair geometry while eliminating conductor untwist.

The termination cap shall be color-coded red to designate Category 5e performance

and shall include a universal label coded for T568A and T568B wiring schemes.

SPECIFICA TION SHEET

applications

end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 100 MHz. With

certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards, this system

will support the following applications:

• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet)

• 155 Mb/s ATM, 622 Mb/s ATM

• Token ring 4/16

• Voice/data systems

• Voice over Internet Protocol (VoIP)

technical information

Category 5e/Class

D channel

and component

performance:

Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801

Class D standards at swept frequencies 1 to 100 MHz

Exceeds component requirements of ANSI/TIA-568-C.2 Category 5e and ISO

11801 Class D standards at swept frequencies 1 to 100 MHz

FCC and

ANSI compliance:

Meets all applicable ANSI/TIA-968-A requirements; contacts plated with 50

microinches of gold for superior performance

IEC compliance:

Meets IEC 60603-7

RoHS compliance:

Compliant

PoE compliance:

Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

UL rated:

UL 1863 approved

Conductor

termination range:

Wire cap compatible with 22 – 26 AWG solid or stranded cable with conductor

insulation diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in.

key features and benefits

100% performance tested

Confidence that each jack module will deliver the critical electrical

performance requirements

Utilizes enhanced

Optimizes performance by eliminating conductor untwist and reduces

installation time and expense

Improved termination cap

Conductor retention slots simplify jack module termination

Modular

Patch Panels and Surface Mount Boxes for easy moves, adds,

and changes

True strain relief

Controls cable bend radius for long-term installed performance

Individually serialized

Marked with quality control number for future traceability

RJ45 interface

Industry standard interface provides a quick and easy plug and play

connection to RJ45 patch cords; backwards compatible

Identification

Can be clearly identified with optional labels and icons for port Identification

Keyed version available

Color-specific keys with positive and negative keying features mechanically

and visually distinguish connections to prevent unintentional mating with

unlike keyed or non-keyed modular plugs, offering network design flexibility,

versatility, accommodating discrete networks for enhanced security

Angle termination

version available

Side opening allows cable to be terminated to the right or left side of the

jack module; ideal for installations that have minimal depth that may not

allow standard bend radius practices to be accommodated

Termination tools

(optional)

EGJT termination tool ensures conductors are fully terminated by utilizing

a smooth forward motion without impact on critical internal components

for maximum reliability; TGJT termination tool ideal for high

volume installations

Block out device

(optional)

Provides a simple and secure method to control access to data ports while

not in use

Shuttered version

(optional)

Integrated shuttered door keeps out dust and debris of unmated RJ45

jack modules

Cabling System

Jack Modules

Jack module:

CJ5E88TGIW*

Shuttered jack

module:

CJD5E88TGIW*

Keyed jack

module:

CJK5E88TG**

Right angle

jack module:

CJR5E88TG*

Plenum:

PUP5504***

Riser:

PUR5504***

LSZH (60332-1):

PUL5504***

LSZH (60332-3):

PUZ5504***

CM:

PUC5504***

Category 5e Performance SD UTP 28

AWG Patch Cords (Dual Rated CM/LSZH)

Feet:

UTP28CH^

Meters:

UTP28CH^^M

CM (foot lengths):

UTPCH^Y

CM (meter lengths):

UTPCH^^MY

LSZH (meter lengths):

UTPCHL^^MY

Patch Panels

24-port, 1 RU:

CPPLA24WBLY

48-port, 2 RU:

CPPLA48WBLY

Patch Panels

24-port, 1 RU:

CPPL24WBLY

48-port, 2 RU:

CPPL48WBLY

For additional modular patch panels and punchdown

patch panels, visit www.panduit.com

Tools and Accessories

Jack module

termination tool:

EGJT or TGJT

Wire snipping tool:

CWST

Wire stripping tool:

CJAST

Clear dust cap:

MDC-C

Blockout device:

PSL-DCJB-^^^

Phone icons:

Data icons:

*To designate color other than IW (Off White),

replace IW suffix with WH (White), EI (Electric Ivory),

IG (International Gray), AW (Arctic White),

BL (Black), BU (Blue), RD (Red), YL (Yellow),

GR (Green), OR (Orange), VL (Violet), BR (Brown), GD

(Gold), LB (Light Blue), or PK (Pink).

**To designate color, add suffix BL (Black),

BU (Blue), RD (Red), YL (Yellow), GR (Green),

or OR (Orange). Each color representing a

different keyed configuration.

***To designate color, add suffix BU (Blue) or

WH (White). For additional cable colors, contact

customer service.

^For lengths 1 to 20 feet (one foot increments)

and 25, 30, 35, 40 feet, change the length designation in

the part number to the desired

length. For standard cable colors other than

Off White, add suffix BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green), OR (Orange),

or VL (Violet). For example, the part number for

a blue 15-foot patch cord is UTPCH15BUY.

^^For lengths 1 to 10 meters (one meter increments) and

0.5, 1.5, 2.5, 15, 20, 25, 30, 35, 40 meters, change the

length designation in the part number to the desired

length. For standard cable colors other than Off White,

add suffix BL (Black), BU (Blue),

RD (Red), YL (Yellow), GR (Green), OR (Orange),

or VL (Violet). For example, the part number for a blue

15-meter patch cord is UTPCH15MBUY.

^^^To designate color other than Red, add suffix

Black (BL), Blue (BU), Yellow (YL), Green (GR),

Orange (OR), Off White (IW) or International Gray

(IG) at the end of the part number. 10/package.

+

To designate color other than IW (Off White),

replace IW with EI (Electric Ivory), IG (International Gray),

BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green),

OR (Orange), or VL (Violet) in the part number. 100/

package.

Contact customer service for bulk packaged

and/or keyed jack modules and patch cords.