USB4105 datasheet(4/11 Pages) ETC

4 / 11 page

PRODUCT SPECIFICATION

Part

Number

USB4105

Rev

Date

24/10/19

Product

Description

USB Type C Receptacle for USB2.0 ,SMT Type, PCB Top Mount

Page

Doc

Number

USB Type C

Prepared

Checked

Approved

www.gct.co

6.2 Mechanical Performance.

Test No

Item

Test Condition

Requirement

6.2.1

Mating/Un-mating

Force

Mate/Un-mated at a speed of 12.5mm/min.

In accordance with EIA-364-13.

Mating force: within

5N to 20N (initial).

Un-Mating force:

within 8N to 20N up

to 30cycles, within

6N to 20N after

10,000cycles

6.2.2

Durability

10,000 cycles at a

cycle rate 500± 50 per hour.

In accordance with EIA-364-09.

Un-Mating force:

within 6N to 20N

Contact resistance:

50mΩ max

Dielectric Strength:

no breakdown

Durability

(Preconditioning)

50 cycles at a

cycle rate 500± 50 per hour

In accordance with EIA-364-09.

6.2.3

Vibration

EIA 364-28 Test Condition VII, Test Letter D

15 minutes in each of 3 mutually perpendicular

directions. Both mating halves should be rigidly

fixed so as not to contribute to the relative motion of

one contact against another. The method of

fixturing should be detailed in the test report

No evidence of

physical damage and

no discontinuity

longer than 1

microsecond.

Contact resistance:

50mΩ max.

6.2.4

4-Axis Continuity

Shall be tested for continuity under stress using

a test fixture

No evidence of

physical damage and

no discontinuity

longer than 1

microsecond.

USB4105 数据表(PDF) 4 Page - List of Unclassifed Manufacturers

USB4105 数据表(HTML) 4 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11

数据表下载