2

Datasheet

ANT-915-IPW1-RPS

IP (Ingress Protection) Rating

An ingress protection rating (IP rating) refers to the capability of a device to withstand the ingress of dust

and/or water under specified conditions. IP rating is typically reserved for marketable product (device) rather

than constituent components because design and assembly may affect performance of the device under

testing. IP-rated antennas are designed to support the specified level of ingress protection and may be

tested in a standalone configuration, however IP testing should be performed on the complete end product

to ensure desired performance.

Table 1. Electrical Specifications

ANT-915-IPW1-RPS

915 MHz

Frequency Range

902 MHz to 930 MHz

VSWR (max.)

1.8

Peak Gain (dBi)

2.7

Average Gain (dBi)

-0.1

Efficiency (%)

99

Impedance

50

Ω

Wavelength

1/2-wave

Electrical Type

Dipole

Polarization

Linear

Radiation

Omnidirectional

Max Power

2 W

Electrical specifications and plots measured with the antenna at the edge of a 102 mm x 102 mm ground plane, bent 90 degrees.

Table 2. Mechanical Specifications

Parameter

Value

Connection

RP-SMA plug (female socket)

Operating Temperature Range

-30 °C to +70 °C

Ingress Protection Rating (IP)

IP67 rated

Antenna Color

Black

Weight

24.9 g (0.88 oz)

Dimensions

203.0 mm x 13.2 mm x 13.2 mm (7.99 in x 0.52 in x 0.52 in)

Product Dimensions

Figure 1 provides dimensions of the ANT-915-IPW1-RPS. The antenna whip can be tilted 90 degrees, with

a detent at 45 degrees enabling the antenna to be oriented in any direction. The rotating base allows for

continuous positioning through 360 degrees even while installed.

37.6 mm

(1.48 in)

Ø13.2 mm

(0.52 in)

203.0 mm (7.99 in)

Full 360° rotation

178.7 mm (7.04 in)

0°, 45°, 90°

13.2mm

0.52in

203.0mm

7.99in

37.6mm

1.48in

13.2mm

0.52in

178.7mm

7.04in

Figure 1. ANT-915-IPW1-RPS Antenna Dimensions