Features

•

User friendly LIS25BA board

•

Complete LIS25BA pinout for a standard DIL 24 socket

•

Fully compatible with STEVAL-MKI109V3 motherboard

•

Double-sided adhesives included for easy mounting on equipment to be

measured

•

RoHS compliant

Description

The STEVAL-MKI211V1K evaluation board has an embedded LIS25BA 3D

accelerometer which is connected through flat cable to a simple adapter board

(STEVAL-MKIGIBV3) to render it compatible with STEVAL-MKI109V3.

The sensor is soldered precisely in the center of the board and double-sided

adhesives are provided to allow users to conveniently mount the board on equipment

destined for vibration analysis. Alternatively, you can mount the board using the holes

located in each corner of the PCB.

The STEVAL-MKIGIBV3 can be plugged into a standard DIL 24 socket. The kit

provides the complete LIS25BA pin-out and comes ready-to-use with the required

decoupling capacitors on the VDD power supply line.

This adapter is supported by STEVAL-MKI109V3 motherboards with high

performance 32-bit microcontroller functioning as a bridge between the sensor and a

PC, on which it is possible to use the downloadable graphical user interface (Unico

GUI), or dedicated software routines for customized applications.

Product summary

3D digital accelerometer

sensor kit based on

LIS25BA

STEVAL-

MKI211V1K

LIS25BA - MEMS digital

output motion sensor: low

noise, high bandwith, 3-

axis accelerometer with

TDM interface

LIS25BA

ST MEMS adapter

motherboard based on

STM32F401VE

compatible ST MEMS

adapters

STEVAL-

MKI109V3

Application

Internet of

Things

3D digital accelerometer sensor kit based on LIS25BA

STEVAL-MKI211V1K

Data brief

DB4042 - Rev 1 - December 2019

For further information contact your local STMicroelectronics sales office.

www.st.com