5/5.8kW Single-Phase Switched PDU with LX

Platform Interface, 208/240V Outlets (20 C13 & 4

C19), L6-30P, 0U, TAA

MODEL NUMBER: PDUMV30HVNETLX

Cost-effective 5/5.8kW PDU distributes, monitors and manages single-phase power in an IT or industrial

environment. Built-in network interface helps monitor load levels to prevent overloads that cause

downtime.

Description

The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and

remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet.

Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19) with

included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. LEDs

indicate each outlet's on/off power status. A 10-ft. (3.05 m) cord with NEMA L6-30P plug connects the

PDU to a compatible AC power source, generator or protected UPS.

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU

status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports

10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2

modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported

include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below

maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch

racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the

included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or

equipment access.

Features

Distributes Network-Grade Single-Phase Power5/5.8kW 208/240V 30A switched PDU with single-

phase input/outputRecommended for network applications requiring individual outlet control, load

shedding and remote monitoring of critical network componentsNEMA L6-30P plug with 10-ft. (3.05 m)

cord connects to compatible AC power sourceFirmware upgrades support future product enhancements

24 Switched Outlets Distribute AC Power20 C13 and 4 C19 outlets split into 2 separately breakered

load banksIndividual outlets can be remotely controlled to power up, power down, reboot or lock out

devicesPlug-lock inserts prevent cables from becoming accidentally disconnected

Digital AmmeterReports load level on each bank and total PDU outputSupports IP-address self-

IDRotates 180° for easy reading at either angle

Built-In LX Platform InterfaceAllows full remote access for power monitoring with email notifications via

secure web browser, SNMP, telnet or SSHOptional EnviroSense2 modules (sold separately) provide a

variety of environmental monitoring capabilitiesNo Java required

Highlights

5/5.8kW 208/240V 30A switched

PDU

q

24 individually controllable

outlets—20 C13, 4 C19

q

Built-in LX Platform interface for

remote access

q

Digital ammeter for on-site load

monitoring in real time

q

NEMA L6-30P input with 10-ft.

(3.05 m) AC power cord

q

To enable the Auto Probe

feature, this product requires LX

firmware update 15.5.2 or later

to be installed

q

Package Includes

PDUMV30HVNETLX 5/5.8kW

Single-Phase Switched PDU

q

Configuration cable

q

(24) Plug-lock inserts

q

Rack-mounting hardware

q

PDUMVROTATEBRKT

mounting bracket accessory

q

Owner’s manual

q

1 / 3