For further information contact your local STMicroelectronics sales office.

August 2018

DB2227 Rev 3

1/6

SPC56P-Discovery

SPC560P-DISP: Discovery+ evaluation board

Data brief

Features

 SPC560P50L5 32-bit 64MHz e200z0h

CPU, 576 KB Flash in an LQFP144 package.

 Shield Connectors (Arduino compatible).

 On-board USB-JTAG PLS debugger and HW

selection mode to use stand-alone JTAG

debuggers (2 x 7 male 100mil connector).

 Free 128 Kbyte code size limited debugging

 Board power supply: from the USB bus (5 V

supply voltage) or through external +12 V PSU.

 All GPIOs and DSPI/USB signals accessible by

a 4x37 100mil pin grid array allowing

connection of an additional boards for

dedicated applications.

 CAN, K-LINE, LIN, FlexRay interfaces.

 Main power switch.

 Reset push button.

 2 potentiometers for ADC evaluation

 12 MHz crystal.

 Board size 152 x 103 mm

Description

The SPC560P-DISP Discovery+ kit helps to

discover SPC560 P line Power Architecture

Microcontrollers with full access to CPUs, GPI/O's

and peripherals such as CAN, JTAG, K-Line, LIN

at budget price.

Dedicated connectors allow plugging Arduino

shields (Arduino-compatible).

Free ready-to-run application firmware examples

are available inside SPC5Studio

(www.st.com/spc5studio) to support quick

evaluation and development.

SPC5Studio includes visual configurable code

generation engine, board support package (BSP),

start-up routines, interrupt services, free RTOS

(optional) and a full set of low level drivers.

SPC5Studio includes HighTec GNU "C" compiler,

with a 30-days full free trial support. SPC5Studio

is available for free download.

The SPC560 P line is designed to address cost

sensitive chassis, airbag, electrical hydraulic

power steering (EHPS), electric power steering

(EPS), and electrical motor control applications.

An E2E Community is available on ST WEB.

Table 1. Device summary

Order code

Reference

SPC560P-DISP

SPC56P DISCOVERY+

with SPC560P50L5

www.st.com