Littelfuse.com

© 2020 Littelfuse, Inc.

Rev: 2-B-051820

8 of 8

POWR-BLOKS

Distribution Block and Splicer Block Outline Drawings

Dimensions Inches (mm)

CHICAGO, ILLINOIS 60631

3RD ANGLE

PROJECTION

TITLE

C

DRW

DATE

GRAMS/PIECE

FINISH GOOD WT

MYORK

12/7/2017

MATL SPEC

FINISH

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN

BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING

TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994

DENOTES CRITICAL CHARACTERISTICS.

DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE

DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION

OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT

AND TRACKING TO BE DEFINED IN

LITTELFUSE INSPECTION INSTRUCTIONS.

DENOTES CP DIMENSIONS, -MINIMUM CP VALUE

MUST BE WITHIN THE DIMENSIONAL LIMITATIONS

SHOWN ON DRAWING AND INITIALLY LOCATED TO

ALLOW FOR MAXIMUM TOOL LIFE.

CPK



CP

SHEET 1 OF 1

SCALE

0LD1440 & 0LS1330 Series for datasheet

NTS

REVISION

REV

DATE

DESCRIPTION

A1

12/7/17

CREATED FOR DATASHEET UPDATE MRY

7.11

[0.28]

35.98

[1.42]

5.03

[0.20]

58.12

[2.29]

49.07

[1.93]

R.10 X .06

[2.6 X .15]

THRU TYP.

21.46

[0.85]

14.20

[0.56]

16.13

[0.64]

37.59

[1.48]

48.39

[1.91]

69.85

[2.75]

10.73

[0.42]

10.73

[0.42]

10.73

[0.42]

41.20

[1.62]

15.21

[0.60]

17.78

[0.70]

1-pole

2-pole

4-pole

2-pole

4-pole

1-pole

Figure 10

Disclaimer Notice – Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse

products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/product-disclaimer.