STM32WB15CC datasheet(29/127 Pages) STMICROELECTRONICS

29 / 127 page

DS13258 Rev 4

29/127

STM32WB15CC

Functional overview

IPCC

HSEM

PKA

GPIOs

(6)

pins

(7)

(8)

pins

(8)

1. Legend: Y = Yes (enabled). O = Optional (disabled by default, can be enabled by software).



R = data retained. - = Not available. Gray cells indicate Wakeup capability.

2. The SRAM clock can be gated on or off.

3. Some peripherals with wakeup from Stop capability can request HSI16 to be enabled. In this case, HSI16

is woken up by the peripheral, and only feeds the peripheral which requested it. HSI16 is automatically put

off when the peripheral does not need it anymore.

4. UART and LPUART reception is functional in Stop mode, and generates a wakeup interrupt on Start,

address match or received frame event.

5. I2C address detection is functional in Stop mode, and generates a wakeup interrupt in case of address

match.

6. I/Os can be configured with internal pull-up, pull-down or floating in Standby mode.

7. The I/Os with wakeup from Standby/Shutdown capability are PA0 and PA2.

8. I/Os can be configured with internal pull-up, pull-down or floating in Shutdown mode but the configuration is

lost when exiting the Shutdown mode.

Table 6. Functionalities depending on system operating mode(1) (continued)

Peripheral

Stop0

Stop1

Standby Shutdow

STM32WB15CC 数据表(PDF) 29 Page - STMicroelectronics